New driving laws effective July 1, 2025

ifiddles

Well-known member
Saw this posted by a friend on FB...did a search and only a few hits came up...is this for real? If so, I don't agree with mandatory ADAS nor the 30 km/h school zones on a 24/7 basis...


 
If I've seen anything when it comes to the quality of drivers today, these 'laws' will be ignored by most...
 
Drivers will find new ways of doing "shortcuts". The police have been in my neighbourhood several times over the past month or so, because drivers blow through the 4 way stop in the area, and the stop sign at the end of the street which turns into a school area. I'd expect more of this.

Thought trucks were already governed with speed controls. I don't see this doing much especially when people cut truckers off then brake, expecting the truck to be able to stop. Or try to merge into a lane at the wrong speed.

If people can't drive in a lane, maybe they should not be driving. I have a feeling these assistive devices while helpful will just lower driver skill and observation.
 
is this for real?

No, it's just a few sites latching onto some garbage they found online and making articles out of it at best, and it's just total clickbait BS at worst.

Most traffic laws are provincial, not federal, to begin with. And much of what is claimed is just not even close to factual, much less anything coming into law in a few weeks.
 
It might be hard to wean drivers from their Timmies. Can you be charged for looking at your smart watch if you only checked the time?

I thought driving regs were provincial so why's Carney's mug in the picture?

If this all comes about it will mean a lot of extra attention for the drivers. However the brain-dead pedestrians and clueless e-bikers can go further down the moron hole and blame the drivers.

Since you can walk into an e-bike store with a handful of cash and ride out on a soon to be modified vehicle enjoying the privileged use of the sidewalk, contrary to the HTA.
 
Saw this posted by a friend on FB...did a search and only a few hits came up...is this for real? If so, I don't agree with mandatory ADAS nor the 30 km/h school zones on a 24/7 basis...


The province banned time of day speed limits a while ago I can't find adas mentioned anywhere else except that article.

Sent from my Pixel 5 using Tapatalk
 
so why's Carney's mug in the picture?

Because there's also sorts of bad actors out there now working really, really hard to discredit and smear him. Look at the deepfake that came out a few weeks ago with some other fantastical BS that got peoples boxers in a full twist when it was all complete BS.

This sure seems like one of those situations.

Too many people just blindly believe anything they see online however, so this will rile up a bunch of people and add gas to the newfound "F Carney" fire that a lot of people are trying to stoke.
 
What percentage of stuff found on the internet, random articles, stuff that comes up when you let a search find things for you, is some combination of AI, clickbait, misinterpretation, exaggeration, and general BS?

I don't know what that number is, but I do observe that it is getting higher. Much, much higher.

This "new driving laws effective XXX" fails the BS test right in the title. Some of what's in there may have an underlying nugget of truth buried way deep inside, but it's surrounded by a whole bunch of probably-AI-written crap. As MP astutely observed ... in Canada, "driving laws" are provincial. There are Federal motor vehicle safety standards ... but those aren't "driving laws".

There's a certain voice that certain AI programs seem to use by default. You all know it. As soon as I hear that voice ... OFF. Probably, somewhere, there is a real person that the AI copied the voice of. Maybe, that real voice might have published a thing or two on the internet, and now AI is using that voice for all of its crap (unless someone using the AI tells it to use a different voice - I think this is how it works).

Motorcycle related. In the VRRA discussion page on facebook (which anyone can join), we've been getting really dumb questions, like "What tools do you use to keep your vintage motorcycle on track?", and when you look at the username, it's clearly some sort of AI bot trying to educate itself. I intentionally give really dumb answers that any human would see through. If you ask "the internet" how to measure and set piston to cylinder clearances and "the internet" tells you to use a tape measure, blame me.
 
I prefer to put in the piston without rings and then pour molten lead in on top. Remove the piston and measure the thickness of the lead. /s

I prefer to completely disregard size and use a sledgehammer to make them fit no matter what. Use some KY Jelly to assist.
 
Back
Top Bottom