Anyone here a cyclist?

[JC99]

Forum Sponsor

Anyone here a suspension whisperer? Rain man when it comes to shocks?

I have a plan but I want to know if it makes sense. I'd like to upgrade the fork that's in my Trek Roscoe 7 (hardtail) that is currently a RockShox Recon Silver 140mm travel. Not the bottom of the barrel but it's a budget option best for lighter use.

My idea is to swap the fork from my e-bike into it which is a 2023 Fox 36 Rhythm Float 150mm travel (the Trek frame can take 150mm travel forks).

To replace the fork in my e-bike I was looking at this

FOX, 2021 Float 36, 160 mm, 29”, Performance Series, A, E-Bike+, GRIP 3pos, 110mm

The legendary 36 is no stranger to accolades, winning awards, accolades, and EWS races with equal panache. 36 offers an unmatchable combination of performance,

www.gearhub.ca

That is a 160mm travel Fox Float Performance level fork but a 2021 model.

I was wondering if this would result in an upgrade for both bikes or would it be a downgrade for the E-bike because it’s a 2021 fork with older tech?

The specs that I'm reading/comparing are making my eyes go fuzzy.

 

[GreyGhost]

Anyone here a suspension whisperer? Rain man when it comes to shocks?

I have a plan but I want to know if it makes sense. I'd like to upgrade the fork that's in my Trek Roscoe 7 (hardtail) that is currently a RockShox Recon Silver 140mm travel. Not the bottom of the barrel but it's a budget option best for lighter use.

My idea is to swap the fork from my e-bike into it which is a 2023 Fox 36 Rhythm Float 150mm travel (the Trek frame can take 150mm travel forks).

To replace the fork in my e-bike I was looking at this

FOX, 2021 Float 36, 160 mm, 29”, Performance Series, A, E-Bike+, GRIP 3pos, 110mm

The legendary 36 is no stranger to accolades, winning awards, accolades, and EWS races with equal panache. 36 offers an unmatchable combination of performance,

www.gearhub.ca

That is a 160mm travel Fox Float Performance level fork but a 2021 model.

I was wondering if this would result in an upgrade for both bikes or would it be a downgrade for the E-bike because it’s a 2021 fork with older tech?

The specs that I'm reading/comparing are making my eyes go fuzzy.

Look carefully at the details. Swapping forks around has a lot of pitfalls (different bearing diameters, different stem length, etc). Changing travel normally changes height of head tube and therefore angle and trail.

Why are you upgrading suspension? What's the goal? Like motorbikes, marginal suspension tuned well beats fancy suspension poorly setup.

On that note, I need to pull mine apart again. I can't bottom it out. I suspect I put in too much oil the last time (small syringe meant counting to a big number and I got interupted).

 

[JC99]

Look carefully at the details. Swapping forks around has a lot of pitfalls (different bearing diameters, different stem length, etc). Changing travel normally changes height of head tube and therefore angle and trail.

Why are you upgrading suspension? What's the goal? Like motorbikes, marginal suspension tuned well beats fancy suspension poorly setup.

On that note, I need to pull mine apart again. I can't bottom it out. I suspect I put in too much oil the last time (small syringe meant counting to a big number and I got interupted).

It's mainly the hardtail. Everything else would be a bonus. It's a decent fork on the Roscoe but it’s just for light trail use. would just appreciate a step up as I'm a heavier rider so less chance of stuffing it up.

The rake/offset on the sale Fox fork is 51mm vs the 44mm that’s there now. What I read is that won't change too much in real terms. The extra 10mm of travel wouldn’t change too much either plus it would cost me $50 to put a different air cartridge into the sale Fox fork to make it a 150mm travel fork the same as what's currently in.

It's whether it would be a decent enough upgrade for me to take the time to dismantle two sets of front ends on the bikes.

 

[Dirty Frank]

Anyone here a suspension whisperer? Rain man when it comes to shocks?

I have a plan but I want to know if it makes sense. I'd like to upgrade the fork that's in my Trek Roscoe 7 (hardtail) that is currently a RockShox Recon Silver 140mm travel. Not the bottom of the barrel but it's a budget option best for lighter use.

My idea is to swap the fork from my e-bike into it which is a 2023 Fox 36 Rhythm Float 150mm travel (the Trek frame can take 150mm travel forks).

To replace the fork in my e-bike I was looking at this

FOX, 2021 Float 36, 160 mm, 29”, Performance Series, A, E-Bike+, GRIP 3pos, 110mm

The legendary 36 is no stranger to accolades, winning awards, accolades, and EWS races with equal panache. 36 offers an unmatchable combination of performance,

www.gearhub.ca

That is a 160mm travel Fox Float Performance level fork but a 2021 model.

I was wondering if this would result in an upgrade for both bikes or would it be a downgrade for the E-bike because it’s a 2021 fork with older tech?

The specs that I'm reading/comparing are making my eyes go fuzzy.

Unless there is a big issue with your current fox 36 i doubt that you would find much if any improvement with the swap.
That being said if you really want the new fork go for it.
Another option would be a rebuild/freshen up of your existing fork I've being happy with fox factory service out of the west coast in the past FWIW.

 

[JC99]

Unless there is a big issue with your current fox 36 i doubt that you would find much if any improvement with the swap.
That being said if you really want the new fork go for it.
Another option would be a rebuild/freshen up of your existing fork I've being happy with fox factory service out of the west coast in the past FWIW.

The shock on my e-bike is very decent, the one on the hardtail is ok. I just wondered if my idea would work to upgrade both. It would be less work to just swap out the hardtail RockShox fork.

 

[Sunday Rider]

The winter bike is ready! I decided to buy a new wheel as a new axle and skewer were onto to cost $40 plus tax. Local bike shop had a 26” back wheel gathering dust and for $99 it was mine. It took me 5 seconds to take it as the old wheel had all loose spokes to deal with too, might still try to fix as a back up. Ya sure.
I had a SRAM nine speed cassette, chain and grip shifter ( never used one before) that I bought off another rider in the spring. This replaced the 8 speed set up I had before. I have a 34 tooth chainring on now, and have a new 36 tooth just in case the 34 skips. All works now on the stand, a road test will confirm if everything lines up. Cleaned up the brakes. Had to take the rear caliper apart as rust and white powdered residue made it impossible to put the new pads in.

Forum Sponsor