Anyone here a cyclist?

Went to the bike show at CNE today , e assist out number pedal bikes two to one.
Looked at an E supersport replica, you could not pedal if you wanted to , available “chip” and it does one fifty kph . Test rode it in the designated area , it would smoke most motorcycles in the first hundred feet . Crazy torque .


Sent from my iPhone using GTAMotorcycle.com
 
Went to the bike show at CNE today , e assist out number pedal bikes two to one.
Looked at an E supersport replica, you could not pedal if you wanted to , available “chip” and it does one fifty kph . Test rode it in the designated area , it would smoke most motorcycles in the first hundred feet . Crazy torque .


Sent from my iPhone using GTAMotorcycle.com

Unfortunately a minority are likely to put a big spanner in the works for more oversight and laws…

 
From this Sunday if you have a bit of time.
They also have condensed versions on their site.

Sunny - interesting race w. iconic classic sections.

Rainy - wet version of Dante's Inferno.
 
Good commentary with some amazing skills.
Not a bad way to waste a few minutes IMO.

Paul has won best in show at the North American Handmade Bicycle Show (NAHBS), the premier annual event showcasing custom-built bicycles.

NSMB.com - Makers - Paul Brodie

AP1GczNQmlFl50pOJAilTAHT00GmeavFIpcYHb0Rhe2r0zDkkCI4nvs0bxCGAC1-X1XQdKOPtfADQ2gYW0tomQKmQxcMtgp-NmhnRQCDMvig6hchl57YNTpfz3IOjjMOnyiE0UCfCvzOGgqIOFbh208tmDiQWw=w676-h905-s-no-gm


He's an avid motorcyclist and former racer. Occasionally teaches framebuilding at Simon Fraser, built an Excelsior board track racer from the ground up, his own sand casted engine cases, everything, from a couple of ancient photographs (his company Flashback Fabricating).

 
Paul has won best in show at the North American Handmade Bicycle Show (NAHBS), the premier annual event showcasing custom-built bicycles.

NSMB.com - Makers - Paul Brodie

AP1GczNQmlFl50pOJAilTAHT00GmeavFIpcYHb0Rhe2r0zDkkCI4nvs0bxCGAC1-X1XQdKOPtfADQ2gYW0tomQKmQxcMtgp-NmhnRQCDMvig6hchl57YNTpfz3IOjjMOnyiE0UCfCvzOGgqIOFbh208tmDiQWw=w676-h905-s-no-gm


He's an avid motorcyclist and former racer. Occasionally teaches framebuilding at Simon Fraser, built an Excelsior board track racer from the ground up, his own sand casted engine cases, everything, from a couple of ancient photographs (his company Flashback Fabricating).

I still have my Brodie Fury. Before he sold the name. Must be at least 25 years old. Just replaced the cables and both shifters.
 
I still have my Brodie Fury. Before he sold the name. Must be at least 25 years old. Just replaced the cables and both shifters.

Your Brodie Fury is aluminum, late 90s/early 00s. Paul sold Brodie R&T to Brodie Bicycles in 96. Paul always works in steel.
 
Last edited:
Back
Top Bottom