Recent content by rakkaus

hahaha valve adjustment...When I did the valve adjustment i accidently dropped a shim and was going to tear the engine apart to find the fker. lucky God listened to my prayers and i was able to pick it up with a magnet. When i heard that click, i was so happy. if you are planning to do valve...

u cant even turn the bolt??? it's possible that the bolt didnt start on the bottom half yet and end up pushing it apart, maybe

i find those stickers are quite useful.. tire pressure/chain adjustment doesnt look that bad, try 6 point socket / wrench

you can buy a cheap plier and cut/grind one end of the jaw 1 mm off

told ya to loosen before taken the wheel off :D when you re-assemble things just keep an eye out for - the master link so the stamped match (mine is upside down lol) -check front sprocket if it can be install on any side facing out. -check your wheel bearing for any play maybe that could be ur...

most people who are taking the m1x or m2x are inexperienced , myself included when i went for g1x/g2x/m2x i googled the route where people took the test before and practiced in that area to get familiar with road signs/speed/traffics etc. I drive/ride more aggressively in the city of where i...

I went through hell trying to get those nut out, was praying not to strip the hex bolt as my cbr250 has a hex bolt and nut on the back.

you probabaly want to loosen the sprocket's nut before removing the wheel as those are probably have loctite applied to them. as for cleaner, i use Kerosense and Dupont chain saver as lubricant

if you dont mind the shorten the chain buy them individually might save ur some i also have chain tool(KM500) u can borrow. rear sprocket $40.22 front sprocket $27.99 chain with master link $133.99 (cut to fit 112)

there's nothing wrong with preparing urself,, check this, might be still same route Brampton M EXIT test you should pass if you follow M2X handbook good luck!!!

can you return the trailer @ Sault Marie and rent it again later? if it's more than 1 day trip

Women

my wife took my car so i ride everyday. on weekend my wife and i go for short ride 1-2 hours

Converting scrap into useful tool, 20 ton press

I did mine through drivetest as well, the test itself is easy there's no risk . they tell you what to do and you do it :D here are a few things to keep in mind. be in a proper tire track dont turn right if the light is RED obey the speed limit you riding lane is far right left tire track (if...