That appears to be a pad sander , a random orbit disc would be about ten x faster . Look for a six in disc ,not five inch , you get thirty percent more area
That appears to be a pad sander , a random orbit disc would be about ten x faster . Look for a six in disc ,not five inch , you get thirty percent more area
Bit of a ***** to both click and lock but it's going ok. Dricore subfloor is pretty good. Doesn't squeak or bounce. Got a few ideas for transitions but I'm going to have to fab a few things up from scrap hardwood and my router.
That appears to be a pad sander , a random orbit disc would be about ten x faster . Look for a six in disc ,not five inch , you get thirty percent more area
Somehow I ended up with about 50 velcro backed 5 inch pads of the right grit but no sander. I did have a speed controlled 8 inch sander with a velcro plate. I overlapped about five small disks onto it and sanded the hardwood floors in a couple of bedrooms.
Looks like a few boards are installed crown down. Be a good time to flip them. Makes deck less slippery when wet, increases lifespan of boards, and keeps the butt joints smoother.
Need to take up 3 rows of the floor and reset them. One plank didn’t lock properly on a long edge and I can see that edge lifting and it’s bugging me. This is the lock system where you tap the short end to lock it in place. When you try to disassemble this joint it often breaks. I have spare planks but I’d rather not use them if I don’t have to. Anyone got any tips!
Need to take up 3 rows of the floor and reset them. One plank didn’t lock properly on a long edge and I can see that edge lifting and it’s bugging me. This is the lock system where you tap the short end to lock it in place. When you try to disassemble this joint it often breaks. I have spare planks but I’d rather not use them if I don’t have to. Anyone got any tips!
If that doesn’t work, take odd the closest long edge baseboard, get the tool that slots in there and mallet to tap them all 3 in so hopefully that one locks.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
