Dzus fasteners

[GateKeeper]

Forum Sponsor

Looking for this item, need just one to see if it will work for what I want to use it for, anyone local that can lend me one, just to try ?

 

[TK4]

https://www.aviall.com/

 

[GateKeeper]

https://www.aviall.com/

I don't think they have 1 I can borrow to test, but Thanks for the link, I can get them at RidersChoice but I have to purchase 5 of them I think it was, and cannot return if they don't work out for me....

 

[daisoman]

I got a bunch you can have. In mississauga

 

[infernobuster]

Ive got a few kicking around if interested ..

 

[GateKeeper]

Mississauga is good, where and when ? I am in the Mavis and Britannia area, daisoman I need 6 if what u have works out, but need only one to test, let me know, thanks

infernobuster, thanks for the offer if daisoman don't pan out I will get in touch with you

thanks guys......

 

[krrakt]

Looking for this item, need just one to see if it will work for what I want to use it for, anyone local that can lend me one, just to try ?

If you want to use them for the front two mounts on your FZ they are not long enough as far as I remember. I recall using the long pins with multiple holes and a cotter pin for adjustment. Like the ones used on muscle car hoods to keep them fastened.

 

[daisoman]

Ya I'm by 403 and dundas. Pm me your number. I might have 6 dunno if I do you can have them all only cuz puremb days

 

[GateKeeper]

If you want to use them for the front two mounts on your FZ they are not long enough as far as I remember. I recall using the long pins with multiple holes and a cotter pin for adjustment. Like the ones used on muscle car hoods to keep them fastened.

Was going to use them to hold where the mid fairing and front fairing meet there are 3 points on each side, it's fairly thin, but there are long ones as well I will have to see what daisoman has and hopefully they work, but I will at least see if it's even something worth trying... The one hole on the mid fairing, I have the nut and screw thar goes there

 

[GateKeeper]

Ya I'm by 403 and dundas. Pm me your number. I might have 6 dunno if I do you can have them all only cuz puremb days

Thanks buddy

pm on its way

puremb days were good times for sure.....

 

[redridernl]

I'm in your area and have some you can try. In my experience, if the fairing wasn't made for them, it will be too thick.

 

[GateKeeper]

I'm in your area and have some you can try. In my experience, if the fairing wasn't made for them, it will be too thick.

Where and when do u want to meet ?

 

[redridernl]

Sorry, I usually only check this during my lunch break. I can meet you at Tim's on Terry Fox and Britannia this evening if you want.

Send a pm

 

[GateKeeper]

pm sent

 

[GateKeeper]

Big thanks to redridernl, we met, and unfortunately the fasteners he has are too short, these were the ones at RidersChoice by WoodCraft, but it was enough too see it would work if I get longer ones so I broke down and ordered some from KurvyGirl, hope I got that right, I got their 14mm long ones, hopefully they are long enough and not too long

thanks to all others as well

 

[infernobuster]

Big thanks to redridernl, we met, and unfortunately the fasteners he has are too short, these were the ones at RidersChoice by WoodCraft, but it was enough too see it would work if I get longer ones so I broke down and ordered some from KurvyGirl, hope I got that right, I got their 14mm long ones, hopefully they are long enough and not too long

thanks to all others as well

Sounds good ..

The bags i have are from Kurvygirl .. good luck with things.

 

[GateKeeper]

Thanks.....

I will try to remember to update this once I get it sorted.....

 

[GateKeeper]

Ordered the fasteners from KurvyGirl, had to get the ones that rivit on, so it's all done now...

Thanks to all that responded and offered their assistance....

.

Forum Sponsor