Anyone here a cyclist?

I might have tried that on my banana seat, high handle bar coaster when I was 10 and didn’t know better. 😂

I've raced on the Worlds courses at Bromont and Mte. Ste. Anne. Those places give you a different outlook on what's doable on a mountain bike.

AP1GczMidX9Zj_s6BMGqXUo65hbi7wOPzED00X5-EpGecvR9UG0y1Q74wROPUSXF73oc-9LtrHapV7enNCsZt4ojP2dL-3yrm9zNFM2487UAJcwNw8RqcL-nhn2BZATOuDOzdkOlnpB_HO5sIH0gGHDkfks57Q=w1371-h905-s-no-gm
 
Last edited:
We use to race down the stairs on the west side of the Skydome, but they're straight and it's basically a stones test to see who'll stay off the brakes the longest. They best technical set in the city is the Baldwin Steps - Casa Loma to Davenport Rd., hands down.

baldwin-steps-1990-91-cta-686x1024.jpg



fs1600x1200px-Baldwin_Steps_2.jpg


fs1600x1200px-Baldwin_Steps_31.jpg
That where Lucas Lee met his demise (Scott Pilgrim...), at the end of the clip.

 
I know those steps. Used to walk my dog along the river down there.
They were difficult enough for walking let alone on a bike.

Sketchiest stairs I've ever ridden were the old ones going from York St. (the old road leading to the OG Queenston-Lewiston Bridge) to the access road to the water treatment plant at the Queenston Docks. The rise/run/angle on each step was vastly different and it was really tricky with them and the pivot turns at the midway landing.

AP1GczNZfdllJdaiZJGehIe5cSRlBFppUMzH2c1LpcDaZDrxp-3TcboSGmDtMJEV89ZjMctsNNECYSmmCViBAbpmJt-3oJkkf_X38LdmrpHikg3EBemvWlls3y8WIj6ySvtwNXqrR80qNgkaxyFneoCSNXTarg=w394-h597-s-no-gm


AP1GczMlFTTE8D14h0tIYTUfBK5YStapMoTtgZWiHhjO2fTTxdaFla30I5Vc2eeqRZILur4X8Lq_0lVeGBWaTpmFXmEX043PPLRvHqOSiR8CwRtXEfj2-_38DgXKTV41DMdaGavX-X-0e3a09kOo7kkwck5MoQ=w263-h394-s-no-gm
 
Found this pic from a couple of years ago on the Dekerf Owners FB page (don't know how I missed it - I'm an admin along with Chris). I had no Idea Chris had built a 36er (his brazed forks are art).

AP1GczPYT1xbo8lFxWt0-V91Zjrs0xPTiR6OFemEt1As0rUC3jBDp8POSXkkTRwT_sZzJQQLc0xD4fh0lpYjHVoqvgCEnHT4fqhyGJsDf9d1cC8gtGo5a79lKrtgPJAXvpNhx3-PhDPvgKaApNQiC9dv7EpLDQ=w720-h537-s-no-gm
 
I know those steps. Used to walk my dog along the river down there.
They were difficult enough for walking let alone on a bike.

That's why I rode down them. Sitting at the bottom watching my friends walk their bikes down them was some pedal-on-shin smackin' funny stuff. That, and the one upmanship with my buddy who's a better MX rider than me who refused to try it.

AP1GczOQ1JsmlxRcNc5loqP3AAAoXo5Zp00ZIClheTsf9XmZvgz80IFvUxw_kHExURGFc9fA28oaB8FErLXLcl5_D04XeAf5bDUgm9kWjBiV1FAMuIbjcosgcZJHvXWnMMaIxavaAJhJze5H-0Dl0XUhuKpAjw=w640-h480-s-no-gm
 
Last edited:
Finally pulled the trigger and picked up this bad boy.

It ended up being the cheapest brand-new bike I could find from a major brand in a frame size that actually fits my height. It’s a leftover 2022/2023 model, and from what I’ve read online, it has some budget components due to the COVID-era parts shortages. I’m assuming those two factors are why the price was so heavily discounted.

I had it shipped to my place and finished the assembly myself. Unfortunately, the front tube was sliced, but honestly, it turned into a good opportunity to learn how to change a bicycle tire and tube. That also sent me down the rabbit hole of tire sizes and valve types… and most of it still doesn’t make sense to me.

For my current goals, though, this bike is perfect. I mainly want to get more physical activity in while doing everyday tasks.

Took it for my first ride today. just a quick short 3 km trip to the library, and it was pure suffering. My quads were on fire, which is a good sign, because those were also the first muscles to give out during my first track-riding course back in May. Strengthening them (and building some endurance) is part of the reason I wanted a bicycle in the first place.

And of course, in classic me fashion, I overshot something: the theft-prevention setup. I bought a Kryptonite Fahgettaboudit chain and lock (50% off from Amazon Warehouse). It was meant for when I start commuting to my new job… but that thing is ridiculously heavy, almost 7 kg (about 15 lbs). At this point, I think it’s going to stay at home as a motorcycle-level security measure rather than something I haul around on a bicycle.
 

Attachments

  • 1000046783.jpg
    1000046783.jpg
    141.7 KB · Views: 14
  • 1000046614.jpg
    1000046614.jpg
    90.9 KB · Views: 14
Just curious, having not bought a bicycle from a shop in decades is there an assembly fee that you save by doing the work at home?
I know in the "old days" Honda/Suzuki said they wouldn't validate a warranty if it wasn't assembled in the shop by one of their techs. Again, this was decades ago.
 
Just curious, having not bought a bicycle from a shop in decades is there an assembly fee that you save by doing the work at home?
I know in the "old days" Honda/Suzuki said they wouldn't validate a warranty if it wasn't assembled in the shop by one of their techs. Again, this was decades ago.
On that line, if you buy a bike from a general retailer (like Canadian Tire), most have you sign something that says you will take it to a bike shop to get inspected before you ride it (at your cost). Their minimum wage staff put it together but don't have the knowledge, skill or time to do it properly.
 
I've got an older Norco hanging from the rafters in my garage, i should really pull it down and clean it up.

I also have a vintage Raleigh, pretty neat as it has a sprung seat and a generator hub on the front wheel that powers up the lights front and rear,

looks like this.

1763293378510.png
 
Last edited:
Just curious, having not bought a bicycle from a shop in decades is there an assembly fee that you save by doing the work at home?
I know in the "old days" Honda/Suzuki said they wouldn't validate a warranty if it wasn't assembled in the shop by one of their techs. Again, this was decades ago.

If you buy it from a Trek, Giant or Specialized dealer they assemble it for free. When I bought my Giant bike I had the option to do it at home myself as it was purchased from a central website and then you can either pick your local dealer, some other dealer or ship to home. Doing it from the local store also allows free tune ups and a free full service in the first year.
 
Just curious, having not bought a bicycle from a shop in decades is there an assembly fee that you save by doing the work at home?
I know in the "old days" Honda/Suzuki said they wouldn't validate a warranty if it wasn't assembled in the shop by one of their techs. Again, this was decades ago.
If you buy it from a Trek, Giant or Specialized dealer they assemble it for free. When I bought my Giant bike I had the option to do it at home myself as it was purchased from a central website and then you can either pick your local dealer, some other dealer or ship to home. Doing it from the local store also allows free tune ups and a free full service in the first year.

Yup, just as JC says. In my case, they didn't have this model in stock at any nearby dealerships; the nearest store with stock was Oakville. There was a $75 shipping fee in addition to the bike's price, whether shipped to my place or the nearest Trek dealership. If I had decided to buy it from Oakville, the price would have been the same as it was shown on the website.

But when I decided to pull the trigger, snow was forecast for the next few days, so I was feeling lazy and not confident enough to ride the bike from the dealership to my place.
 
On that line, if you buy a bike from a general retailer (like Canadian Tire), most have you sign something that says you will take it to a bike shop to get inspected before you ride it (at your cost). Their minimum wage staff put it together but don't have the knowledge, skill or time to do it properly.

Depends. CTC does hired qualified people to assemble bikes. It's hit and miss. It's piece work and if you're good and fast you can make decent money.
 
Back
Top Bottom