Wood shop

Jampy00

Well-known member
Site Supporter
With winter coming and have close to 3000sqft at my disposal, I'm considering starting a small wood shop as if like to learn and make a few projects.
What tools, equipment should I keep my eye out for?

I'm thinking mostly small projects to start, even thinking of going the all hand tool route...


Always looking for input or ideas, nothing set in stone and a zero dollar budget.. 😂
 
If you want a decent cast iron table saw, my dad has a delta with very low usage that will never be used again. Not free but reasonably priced. If you want hand tools, he has rip and crosscut handsaws.

Start your planning with what this shop is supposed to produce. Making live edge tables vs jewelry boxes rewards spending money in different places. Once you have projects in mind, work them through mentally to figure out the tools you need.

You can get by with one of table saw or track saw. Jointer/planer lets you buy cheaper wood and clean it up yourself. Vevor now makes some tools that used to be insanely expensive (like festool domino). A lot of time is spent sanding, spending a decent amount of your budget there often makes sense.

Radiant heaters make life more enjoyable and you don't need to wait for the shop to heat up.
 
I'd like to make wall hangers for my growing collection of Stihl products.
Then shelving, work tables etc. nothing decorative at this point.
 
I’d say table saw is a bare minimum start.

Mitre will also be very handy.

Going into jointers and large sanders / thickness planers is great but may not be the right way right off the bat.

Drill press is something I’d also highly consider.

Best is to check out some DIY videos for what you want to do, and then see what tools they used as a start.

You running 110 or 220V in there? Some of the larger tools need a 220V feed.

My dads got a bunch of tools so if you’re looking for anything specific he’s looking to reduce his collection. I’ve only got a 10” table saw that’s awesome, but I need something more portable for regular use.
 
Bandsaw is also a tool to consider as well as a good router table.

Good table saws are available very cheaply as few people have the room for them. I bought a cheap portable table saw to make some livingroom builtins and a butler pantry a few years ago but sold it right after as it wasn't very good. I'm doing a full 8x10' walkin closet and another closet this Winter so I just bought a new Dewalt DWE7491RS last week as it was on sale. For a portable saw it's quite nice (I would have picked up a used proper table saw but for the limited needs I have I didn't want to store the large saw).

Consider also making a large flat table work surface.

I had a full professional wood shop passed down to me but I sold off the large power tools as I didn't need them or have room to store them constantly. I have a bunch of small manual handtools/bits/sanders/etc that I'm selling off as I have doubles/triples if you're interested.
 
Bandsaw is also a tool to consider as well as a good router table.

Good table saws are available very cheaply as few people have the room for them. I bought a cheap portable table saw to make some livingroom builtins and a butler pantry a few years ago but sold it right after as it wasn't very good. I'm doing a full 8x10' walkin closet and another closet this Winter so I just bought a new Dewalt DWE7491RS last week as it was on sale. For a portable saw it's quite nice (I would have picked up a used proper table saw but for the limited needs I have I didn't want to store the large saw).

Consider also making a large flat table work surface.

I had a full professional wood shop passed down to me but I sold off the large power tools as I didn't need them or have room to store them constantly. I have a bunch of small manual handtools/bits/sanders/etc that I'm selling off as I have doubles/triples if you're interested.
I use a dewalt portable table saw instead of the cast-iron for that reason. I can store it up on a shelf and save floor space. The dewalt rack and pinion fences are fantastic. Cut finish, saw stability and functionality (can't take dado blade) suffer a little but it's a solid choice. When building my last deck, I was ripping 12' 2x8's at full depth to bevel the top railing. The saw was working hard but got it done.
 
Go to the Habitat ReStore. As a volunteer I see "grampa died" (my term not theirs) loads every week. Good quality hand and power tools that none of the kids want. "Too bad grampa didn't video game"
At this point you don't need much more than a mitre saw, a drill and some kind of sanding device (orbital/palm).
 
Back
Top Bottom