Show us yours. This is Waterloo.
Smog
- Thread starter Wingboy
- Start date
Apparently Waterloo is the highest AQI at 264 in that area. Very unhealthy. Thunder Bay at 564, that's almost lethal.
We're at 66 so far. MERV 13 in the home HVAC and running blower on high continuously. Put a Bosch HEPA filter in the vehicle as well.
Trying to get MERV 13's installed in the office roof HVAC units but the cheap f'ers won't budge.
We're at 66 so far. MERV 13 in the home HVAC and running blower on high continuously. Put a Bosch HEPA filter in the vehicle as well.
Trying to get MERV 13's installed in the office roof HVAC units but the cheap f'ers won't budge.
Most furnaces hate merv 13 (unless you replace filter box to allow folded filters with far more surface area). They cause a huge pressure drop and likely reduce flow rate enough that there is insuficient airflow and condenser ices up. A separate hepa system, bypass filter or homemade filter box all can work to reduce indoor particulates without hurting furnace operation.
Glenn/RZ500
Well-known member
Same in Kawartha Lakes right now, yesterday eve was brutal. If only we had some excess cash, like the 27 or so billion we`ve laundered in Ukraine for what? To make criminal scumbag politicians even more wealthy, that`s what. Not to mention the countless billions pizzed away in the last 11 years. That could handily purchase about 500+ DHC-515 waterbombers. How long before our American neighbors deservedly come at us...again, over forest fire smoke
Last edited:
Install tech checked with Goodman as that was a prerequisite for my new install. MERV 13 is OK they said but I'll most likely have to change them more frequently to maintain acceptable airflow. I scored a Magnahelic differential pressure gauge from a decommissioned system at work so I installed that and change the filter when the airflow drops (4-6 weeks).
You havn't been watching very close.
