Windshield Recommendations

M

mimico_polak

Well-known member
Site Supporter
Forum Sponsor
While the bike stays on FBMP and Kijiji I'm still toying with items to make it 'better' for my riding. One of the weak points, is the windshield. I bought a small bikini fairing / windscreen and while it helps a little bit...I'd prefer more protection from the wind on the body.

I've seen a few 'universal' windshields, but very few of them will confirm whether they work with the 7/8" bar on the Scrambler.

This one in particular seems like a decently priced option, but KapscoMoto wouldn't confirm whether they work with my bike or not as the manufacturer didn't outright say it.

It 'should' work...but I won't be able to return an item that isn't compatible on the site, and then I complain it doesn't work...

www.kapscomoto.com

Krator Universal Motorcycle Windshield Windscreen for 7/8" or 1" Handl

Features: [OPTIMAL FIT FOR YOUR MOTORCYCLE]- KRATOR's motorcycle windscreen is a universal motorcycle windshield fitting motorcycles with 7/8 Inch (2.2 cm) or 1 Inch (2.5 cm) handlebars. [RIDE CONFIDENTLY WITH ADVANCED COMFORT]- KRATOR's motorcycle windshield makes your ride safer by blocking...
www.kapscomoto.com www.kapscomoto.com

Any other options? Not wanting to spend $200+ on a windshield for a 'potentially keep' option. I had a Spitfire on the Rebel 500 and it was much better than without. GIVI/KAPPA options run around the $200 mark once you add the mounting kit to it.

Same goes for the used FBMP market as majority are Harley type (with the metal frames), and very few people have part numbers on the listing, or any inkling of what it comes with or can be mated to.
 
JZ67 said:
Is a Ducati 7/8" different than other 7/8"? Not sure I understand why it won't fit.
Click to expand...
That's exactly my thought as well. I was hoping to reach that manufacturer to get confirmation as KAPSCO can't/won't. It could be clearance to get over the speedo...but not sure.

I have minimal experience with this as the only one I bought was for the Rebel and I wish I kept it.
 
I think Fortnine does free returns. What about a clip on deflector on top of what you have already? You can just take it off when needed.
 
jc100 said:
I think Fortnine does free returns. What about a clip on deflector on top of what you have already? You can just take it off when needed.
Click to expand...
Not anymore ... small fee (can't recall what it is now but it'll be on their website I'm sure).
 
Relax said:
Kapsco won't let you test fit it in their parking lot? Otherwise buy, install in the parking lot, and return if it doesn't.
Click to expand...
Honestly the thought didn’t even occur to me…I’m so used to buying online I don’t even think of going and trying it.
 
NuggyBuggy said:
I wouldn't put any money in accessories for a bike I'm actively trying to sell. As is said so often here, accessories aren't going to bring back much - if anything - on resale.
Click to expand...
I’m putting in maybe…$200 for these accessories. If that.

$110 for the paddock stands.

Got a windshield today for $45. The GIVI brackets to try and make my cases fit for $30.

The rear luggage I already had.

And the suspension adjustment was free as it’s just preload. Zero chance I’m spending $1k on a spring for my bike.
 
oioioi said:
Did you make the hard cases work?
Click to expand...
Not yet…I need some McGyver magic for that one.

So if any GTAM McGyers are around the area let me know as I’ll need to do some brainstorming.
 
mimico_polak said:
Not yet…I need some McGyver magic for that one.

So if any GTAM McGyers are around the area let me know as I’ll need to do some brainstorming.
Click to expand...
I can swing by.
Here is my resume.
This Givi Tool box case is NOT suppose to work with my bike and side case racks.
Don't tell me what not to do......


I ended up making one for each side.









 
Last edited:
mimico_polak said:
While the bike stays on FBMP and Kijiji I'm still toying with items to make it 'better' for my riding. One of the weak points, is the windshield. I bought a small bikini fairing / windscreen and while it helps a little bit...I'd prefer more protection from the wind on the body.

I've seen a few 'universal' windshields, but very few of them will confirm whether they work with the 7/8" bar on the Scrambler.

This one in particular seems like a decently priced option, but KapscoMoto wouldn't confirm whether they work with my bike or not as the manufacturer didn't outright say it.

It 'should' work...but I won't be able to return an item that isn't compatible on the site, and then I complain it doesn't work...

www.kapscomoto.com

Krator Universal Motorcycle Windshield Windscreen for 7/8" or 1" Handl

Features: [OPTIMAL FIT FOR YOUR MOTORCYCLE]- KRATOR's motorcycle windscreen is a universal motorcycle windshield fitting motorcycles with 7/8 Inch (2.2 cm) or 1 Inch (2.5 cm) handlebars. [RIDE CONFIDENTLY WITH ADVANCED COMFORT]- KRATOR's motorcycle windshield makes your ride safer by blocking...
www.kapscomoto.com www.kapscomoto.com

Any other options? Not wanting to spend $200+ on a windshield for a 'potentially keep' option. I had a Spitfire on the Rebel 500 and it was much better than without. GIVI/KAPPA options run around the $200 mark once you add the mounting kit to it.

Same goes for the used FBMP market as majority are Harley type (with the metal frames), and very few people have part numbers on the listing, or any inkling of what it comes with or can be mated to.
Click to expand...
That's a Chinesium clone of the classic Slipstreamer Spitfire universal shield -- they've been around for 20+ years, they fit everything!

I used the same screen on a few motorcycles, a snowmobile, and an ATV.

They work well up to 120kmh, then they bounce a bit. They are made of plexi that's easily cut down if you like a smaller profile.
 
mimico_polak said:
Honestly the thought didn’t even occur to me…I’m so used to buying online I don’t even think of going and trying it.
Click to expand...
Kapsco sells for the same price on the Jungle website -- returns are easy.


I think your bike would look better with one an aftermarket Batwing.


1724205959287.png
 
PacoT said:
Have you considered Puig? I used to have one of their universal windscreens in my F800R. It was functional, but not aesthetically pleasing (the bike and the windscreen).

View attachment 69396
https://fortnine.ca/en/puig-touring...MIsYP7_8eDiAMV1En_AR3kZANREAQYASABEgJHevD_BwE
Click to expand...

I like Puig and Givi.
I ended up importing a Givi windshield directly from Italy when they first launched as I was too impatient lol:

givi_a4117_windscreen_kawasaki_z65020172018_750x750.jpg


screenshot_20220206-180935_gallery-jpg.5541


One of my favourite mods to date as I am little broad shouldered/ big chested. Now I can breeze through until 160/170 with less drag when in Mexico!
Forum Sponsor
 
You must log in or register to reply here.
Back
Top Bottom