Yeh
That's my plan to splice a few wires within the harness & to swap the conectors from one harness to the other.
I also had seen on YouTube that people have used open barrel conectors to splice wires together & then added heat shrink over it.
And also seen on YouTube by soldering wires...
I prefer to stay with oem it's just that a few of the small spade conectors that is on the donor harness is not in good shape & there are some wires exposed.
The same conectors that is on my other harness are in much better shape & what I plan on doing is to cut off the bad conector from the...
I have had an electrical fire on my vstar 1100 & the main wiring harness needs to be replaced as part of it got burnt.
I already have another harness that I got from a motorcycle wrecker & a few of the smaller connections need to be swapped from my other harness & then spliced onto the harness...
On the gasket where the bolt hole is cut out it is narrow & the crack is in this narrow part in the center of the bolt hole, but further away from the interior of the engine.
If I do not use yamabond do you think there may be a leak?
Yesterday I had quite some trouble installing my stator cover onto the bike & dealing with the magnet was not helping.
After an hour I finally got it in place, but when I was struggling with the cover the gasket broke in the top center of a couple holes near the edge where the bolts go through...
I will be going on a big trip with my 13 yr old daughter which may consist of 2000km & thinking of getting a GoPro camera to go onto my helmet as our trip will be something I want her to remember.
Would like to get some reviews on some good GoPro mounts that would go onto my helmet without...
I can drill through the plate to match up the holes to the frame but the existing holes on the plate are exposed beyond the frame on the inside.
Looks a little takey the way it is without drilling new holes.
Just bought a kuryakyn licence plate frame product number 9166 & the mounting holes are way off from the holes that are on my ont plate.
Looking for suggestions on what to do in this case.
Or would the mto make a custom plate that would match the holes on my frame if anyone had this done.
I have just received my Cobra laser cut chrome luggage rack for my VStar 1100 Classic & the load limit on this is 10lbs according to the sticker that is on it.
I am planning a 5-6 day trip which may consist of up to 2000km with my daughter & I have a large motorcycle luggage bag which may weigh...
I am possibly thinking of getting a mustang driver & passenger seat for my vstar 1100 as a summer trip is being planned with my daughter which may consist of close to 2000km.
Could I please get some feedback from people who have experience with mustang seats in respect to comfort.
Thank you
Looking for a studded mustang driver & passenger seat for my 03 v star 1100 classic, if anyone is willing to sell this that will fit my bike.
Thank you
Have a VStar 1100 Classic with stock exhaust & would like to hear in person what Vance & Hines or fishtail pipes sound like on a VStar 1100 before I make this change on my bike.
Would anyone be willing to do this as we can meet up at a location in Toronto or just outside of the city.
Thank you
My 2003 Yamaha V Star 1100 has an ais system & along with this there are two black rubber hoses that are connected to a set of pipes.
I need to replace the inner one as there is a crack in it.
Would anyone have this that I can purchase as I have been going to numerous places to find this same...
Hi Brian
Thanks for the info.
It's the hex screw with the lock nut to make adjustments.
Also torqued the lock nuts to 20ft lbs as per the service manual
I checked the valve clearances on my 2003 V Star 1100 & they needed to be adjusted as all appropriate steps were followed for this entire procedure using my service manual.
Noted clearances in my service manual.
Intake 0.07-0.12 mm
Exhaust 0.12-0.17 mm
I set the intake clearances on the front &...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.