Tig Welder in Markham area to weld Steering Damper Mount to DRZ400 Frame

[yu130960]

Forum Sponsor

Does anyone know a good Tig Welder in the Markham area (GTA North East) that can tig weld the support tower for a Scott's Steering Damper? You can see in the pic below although it is painted, what the tower and the weld is to look like.

 

[RonnieRev]

Bondi engines in Aurora, excellent welder and pro dirt bike shop
www.bondiengines.com

 

[m.breen]

I wouldn't let Bondi's work on a bicycle, and I speak from my own experience.

 

[RonnieRev]

What did Bondi do to you ?

 

[yu130960]

Thanks. I didn't know Bondi had a tig welder. I will call them up in the morning, although I imagine they are going to be busy with sleds. My experience with them has been pretty good, hope they can help me out.

 

[m.breen]

Bondi completely botched an engine rebuild for me to the tune of $1500, and would not man up to it.

 

[RonnieRev]

There is two sides to every story, I have only seen top notch work come out of his shop.

 

[yu130960]

Called this a.m. and Bondi said they could do it with their tig welder.

Also, came across the web site http://www.z1cycletech.com/ and I believe they could do it as well.

I will post pics of the complete job once I get it done.

 

[LGdrama]

JohnnyP @ Stunters INC.

 

[yu130960]

Thanks for the Stunters link. Looks cool although it is on the other end of the City for me.

 

[m.breen]

It is pretty straight forward, the engine started smoking before the warranty of 6 months, by 8 months it was not road worthy. Chris said there was nothing he could do, except rebuild at same cost. Worst automotive repair shop I've ever dealt with, hands down, and I've been dealing with shops for 32 years now.

 

[RonnieRev]

What type of engine was this m.been ?

 

[m.breen]

It was a V6.

 

[RockerGuy]

There's a guy on the east end that has a shop. He does vintage cycles. Contact Retrogrouch, I can't remember his name

 

[ItIsWhatItIs]

Does anyone know a good Tig Welder in the Markham area (GTA North East) that can tig weld the support tower for a Scott's Steering Damper? You can see in the pic below although it is painted, what the tower and the weld is to look like.

Curious, what is this going to accomplish?

 

[toysareforboys]

Chuck at A J Fabrication did an amazing tig weld for my new custom exhaust (Stainless to Ti), looks factory, beautiful work! Did it while I waited, super reasonable!!

http://www.ajmanufacturingontario.ca/
[h=4]A J Manufacturing Ltd.
320 Marwood DR
Oshawa, ON L1H8B4
(905) 723-9426[/h]

 

[RonnieRev]

It was a V6.[/QUOTE

m.been, your bad mouthing the wrong shop, Bondi engines is a small engine performance/fab shop, mostly working on sleds and dirt bikes

 

[m.breen]

Bondi engines, in Aurora, Chris Bondi

 

[yu130960]

There is a Bondi Engines front and back. I believe the front does auto and the back does the small engines. I am not sure of the exact relation. To get to the back Bondi (small engines), you have to go through the fenced gate (took me a bit to figure that out the first time (notwithstanding the sign)).

http://maps.google.ca/maps?q=bondi+...=5TIn_-qVV93N63SXSKJV1Q&cbp=12,337.63,,0,0.41

 

[m.breen]

Seen, or heard?...You have any experience with this shop?...Now you can say that you know of someone that got a crappy deal. I don't forget a shop that screwed me out of $1500

Forum Sponsor