Bumper facia has faded to grey. Before I drop $20 on McQuires Ultimate Black, has anyone used this stuff or have another product known to work?
Restoring black bumper material.
- Thread starter timtune
- Start date
Mad Mike
Well-known member
I tried a lot of snake oil on our Transit Connect fenders - nothing, including McGuires Ultimate lasted more than a couple of months.
What worked? Duplicolor adhesion promoter and Rustoleum semigloss paint. Prep well with a good scrub and degrease, then spray. That looked like the OE finish and was still looking good when we sold the trucks 3 years later.
Peanut oil. The real stuff, like you find floating on the top of Adams PB. You can drain off and store enough to do your trim a couple of times before you mix it in to the peanuts according to the instructions. I used it on the trim of my Rallye Golf. Would give it a touch up before a show. It doesn't last more than a few months (like the expensive snake oil), but is $6ish, it won't harm paint or anything else, and you get a jar of natural PB to eat.
sburns
Well-known member
Mad Mike
Well-known member
I use Amazon. Canadian tire sell it too, but their inventory on odd products is hit and miss.
Mad Mike
Well-known member
It only stays black for weeks, not months. Good if you’re ok with doing several times a year.
Another option is using a heat gun. It takes a while and you can permanently damage trim if you’re too aggressive. Watch yootoob videos for more info.
@Gary
www.jalopnik.com
Here's How To Make Your Car's Black Plastic Trim Look Like New Again - Jalopnik
An explainer on how to make your car's black plastic trim look new again
www.jalopnik.com
I like to stick with products that won't go rancid, or attract critters.@Gary
Here's How To Make Your Car's Black Plastic Trim Look Like New Again - Jalopnik
An explainer on how to make your car's black plastic trim look new again
303 Aerospace was recommended by a fellow gtam'r. It works a bit better than armour all.
