Looking for someone to help me install a few mods. Will buy booze :P and/or cash

I'm looking again for someone that's comfortable rejetting a bike (Ninja 250) sometime this week. I live right by Fairview Mall.

Thanks!
 
onecartel said:
My offer still stands. No homo.
Click to expand...

You live by Yonge and Sheppard right? Where would we work on the bike or are you comfortable coming over to my place *wink*. All i have is a torque ranch a socket set the default motorcycle tool kit. I dont know if its enough. And are you comfortable with rejetting a bike (taking off tank and carbs)?

Thanks
 
Sushii said:
You live by Yonge and Sheppard right? Where would we work on the bike or are you comfortable coming over to my place *wink*. All i have is a torque ranch a socket set the default motorcycle tool kit. I dont know if its enough. And are you comfortable with rejetting a bike (taking off tank and carbs)?

Thanks
Click to expand...


Through my years I've "jetted" several "carbs" and "shimmed" plenty of "needles"...ifyaknowwhadimean.

Lemme look over a ninja manual, shouldn't need anything more than a screwdriver and 3 sockets. I'm assuming you have your new jets already? I live in a condo, so your place would probably be best.
 
from ninja250 wiki


  • #2 Phillips Screwdriver.
  • 2 10mm wrenches.
  • Metric Allen Key set.
  • 10mm socket, wrench, and 6 inch extension.
  • 2 flat bladed screwdrivers.

You free sunday morning? .
 
Sushii said:
You live by Yonge and Sheppard right? Where would we work on the bike or are you comfortable coming over to my place *wink*. All i have is a torque ranch a socket set the default motorcycle tool kit. I dont know if its enough. And are you comfortable with rejetting a bike (taking off tank and carbs)?

Thanks
Click to expand...

Torque ranch eh? That's quite the misspelling of wrench.

:lmao:
 
onecartel said:
from ninja250 wiki


  • #2 Phillips Screwdriver.
  • 2 10mm wrenches.
  • Metric Allen Key set.
  • 10mm socket, wrench, and 6 inch extension.
  • 2 flat bladed screwdrivers.

You free sunday morning? .
Click to expand...

You have to take off the tank and take out the carbs to rejet. I live in a condo too lol.

jay-d said:
Torque ranch eh? That's quite the misspelling of wrench.

:lmao:
Click to expand...

And this is how you can tell i suck at these mechanical stuff lol.
 
Careful, I read about how the screws arnt actually Philips screw but are JIS screws and a lot of people have stripped them using a Philips.

Lion
 
You could use my driveway as long as your not making a MESS lol

I will be attempting to work on my bike too.
 
So i called Z1 and asked how much it would cost for them to professional installed exhaust and rejet + oil change. Its about $360 in labour (4 hours).
 
I've got the tools and garage space, but I'm near Vaughan Mills mall. Not sure if you want to travel that far?
 
hahaha i work at fv mall every day! is it okay if i tag along with my ninja 250 to check out how things are done for the future?!
 
You must log in or register to reply here.
Back
Top Bottom