Help? Two extra bolts , where do they go?

[FattBoyy]

2010 cbr600rr

Okay after stripping my bike down and straightening out the subframe and putting it back together i am left with two extra bolts. I labeled all the bolts accept for these two

Anyone familiar with these?

It’s a 5 mm Allen key bolt

Sent from my iPhone using Tapatalk

 

[J_F]

those are usually holding plastic bits on
maybe check under the seat?

 

[FattBoyy]

those are usually holding plastic bits on
maybe check under the seat?

I think I hope I figured out. I did a fender chop and these are the extra bolts from the inside light housing


Sent from my iPhone using Tapatalk

 

[J_F]

sure they're not from the EZ curl bar?

sorry man, it'll take a bit until that's forgotten

 

[Mina]

How can you seriously expect anyone to tell you where those bolts are from? There's probably at least 20-30 screws on the bike that look like that.

The solution is simple: quit taking **** apart if you don't know how to put it back.

 

[RockerGuy]

How can you seriously expect anyone to tell you where those bolts are from? There's probably at least 20-30 screws on the bike that look like that.

The solution is simple: quit taking **** apart if you don't know how to put it back.

Having a rough day?

 

[RockerGuy]

2010 cbr600rr

Okay after stripping my bike down and straightening out the subframe and putting it back together i am left with two extra bolts. I labeled all the bolts accept for these two

Anyone familiar with these?

It’s a 5 mm Allen key bolt

Sent from my iPhone using Tapatalk

You've re-engineered the bike with less screws. You're technically more efficient than Honda engineers. Pat yourself on the back.

 

[FattBoyy]

sure they're not from the EZ curl bar?

sorry man, it'll take a bit until that's forgotten

Hahahah nice !!!!


Sent from my iPhone using Tapatalk

 

[FattBoyy]

How can you seriously expect anyone to tell you where those bolts are from? There's probably at least 20-30 screws on the bike that look like that.

The solution is simple: quit taking **** apart if you don't know how to put it back.

“Why you mad bro”


Sent from my iPhone using Tapatalk

 

[FattBoyy]

You've re-engineered the bike with less screws. You're technically more efficient than Honda engineers. Pat yourself on the back.

Haha yes !!!! Positive thinking. I just took her out for a spin. My first SS bike. I will do a review thread later tonite


Sent from my iPhone using Tapatalk

 

[boyoboy]

sure they're not from the EZ curl bar?

sorry man, it'll take a bit until that's forgotten

pffftt everyone knows those came off the bench press ......lmao fatt boyy and looking forward to the review. please don't get your battery terminals crossed up.

 

[empty]

My old Ninja had screws for the fairing underneath the engine. Do you have anything like that?

 

[Riceburner]

sure they're not from the EZ curl bar?

sorry man, it'll take a bit until that's forgotten

Beat me to it.

Looks like faring bolts, would have rubber washers with them too usually.