grahamsn
Well-known member
FZR400/600 parts for sale
38mm steering damper fork clamp - $10
Triples, upper and lower, with good bearings - $40
OEM '90 and up FZR600 forks (lowers/sliders for the 4 piston calipers and 298mm dished rotors) ***I took a good look at the tubes, and there is no pitting or nicks in the swept area of the seals. Lowers/sliders are in good shape, along with the internals and caps. Needs seals - $50
Front fender, solid red mediocre paint (includes OEM fork brace) - $20
Rear wheel (4.0” X 18”) with rotor and hub/cush drive - $70
Rear sprockets - one AFAM (almost new) and three unknown brand ***I will have to check the teeth count tomorrow morning, and will update this post - $10 each or 4 for $30
FZR400 speedometer, with cable and front wheel speedo drive. Small dent in the bezel/rim around the speedo, but no crack in the lens/cover. The dent could easily be filled and painted - $40
Can bring these parts to VRRA Rd#2 at Shannonville, or ship of course.
Cheers,
Graham
38mm steering damper fork clamp - $10
Triples, upper and lower, with good bearings - $40
OEM '90 and up FZR600 forks (lowers/sliders for the 4 piston calipers and 298mm dished rotors) ***I took a good look at the tubes, and there is no pitting or nicks in the swept area of the seals. Lowers/sliders are in good shape, along with the internals and caps. Needs seals - $50
Front fender, solid red mediocre paint (includes OEM fork brace) - $20
Rear wheel (4.0” X 18”) with rotor and hub/cush drive - $70
Rear sprockets - one AFAM (almost new) and three unknown brand ***I will have to check the teeth count tomorrow morning, and will update this post - $10 each or 4 for $30
FZR400 speedometer, with cable and front wheel speedo drive. Small dent in the bezel/rim around the speedo, but no crack in the lens/cover. The dent could easily be filled and painted - $40
Can bring these parts to VRRA Rd#2 at Shannonville, or ship of course.
Cheers,
Graham
Last edited: