Anyone got a 10mm flare nut wrench I can borrow?

[jay-d]

Forum Sponsor

I'm swapping out my rubber hoses for braided, and don't have this tool.
Can't seem to find a decent one on Amazon, they're either weak or the sizes are not accurate and Crappy Tire only sells a set.

I'm in Mississauga!

 

[Mad Mike]

Make one. Take a 10mm box end wrench and cut out a slice.

Or try a good quality open end wrench. I’ve changed a gazillion brake lines over the years, don’t recall ever using a flare nut wrench on a motorcycle.

 

[jay-d]

Make one. Take a 10mm box end wrench and cut out a slice.

Or try a good quality open end wrench. I’ve changed a gazillion brake lines over the years, don’t recall ever using a flare nut wrench on a motorcycle.

Oh snap, I totally have a bunch of 10mm I could cut open, that's a great idea, thanks!

 

[Relax]

Or try a good quality open end wrench. I’ve changed a gazillion brake lines over the years, don’t recall ever using a flare nut wrench on a motorcycle.

Same - It never even occurred to me to use a flare nut wrench on motorcycle brake lines, but definitely don't use a cheap/loose-fitting 10 (or worse, an adjustable).

Forum Sponsor