Search results

I ended up buying a used frame from US Ebay for 80 USD. I used a service called shippsy to get the package delivered to Toronto for a reasonable price. Ended up costing around 150CAD after all fees.

Hi, I crashed pretty badly at the end of this season and bent the subframe to the point that it's not really repairable. The plastic tray that holds the battery and wiring is cracked into multiple pieces too. My options are to get a used stock subframe and tray which would cost around 400-500...

Brake cleaner worked wonders! There is actually quite a few scratches on the fairing after I scraped it to remove the glue but I will use that microfiber cutting disc to take them out as suggested in the videos. Thanks for the help!

Ok I put an order for this stuff: Cleaner Will update with the results.

Here are some pictures. I watched the videos but I don't think those methods will work. I should've heated up the sticker before removing it and now I'm stuck with this mess. The only thing that works a bit is heat and large amounts of nail polish remover but it will take me hours to fully...

Hi! I bought a used track bike that had custom stickers with previous racers name on it. I removed the stickers but they left a lot of residue, I managed to get most of it off by heating it up and scraping it off but there is still a layer that does not want to come off. I tried wd40...

Some of them I cut, some of them I drilled through. They're finally off. Thanks for help and I will replace them with the locks.

The closest rivet I could find is this: POP POP PLASTIC EXPANSION RIVET - Blind Rivets - POP57741 | 57741 - Acklands-Grainger, Canada

Yeah I could reach one of them like that.

There is no hex in the pin, it's probably an imprint from when I was trying to push it in with a small hex key. I can't get to the back of any of the pins very easily.

So something like this: Trim Clip Pliers | Princess Auto or Push Pin Pliers ? I'm still having a hard time understanding how I could use them without damaging the rivet. I watched this video: but my rivets don't look anything like that. I can't get to some of the rivets from under the fairing...

Something like this: Performance Tool W2005 Poly Riveter Kit (41pc): Amazon.ca: Automotive ?

New to me 2007 CBR600 with racing fairings. The upper fairing is held together with plastic rivets. They have a middle pin that I think is supposed to release when pushed in. One of the pins was already pushed in but it's still holding the fairing in place But it's still holding the...

If you can't figure it out on your own let frekeguy know - he's very good with fixing issues like this and doesn't charge dealer prices.

If you have a car, M full, and are 30 years old then all state should give you a much better rate

Got my statefarm renewal for my Daytona. Went from 2400 to 4400, needless to say I will be switching to Allstate the moment I get my M full.

Tried him as well - no luck

I am currently with State farm and I called TD, Allstate, Intact and none of them want to insure me for a reasonable amount of money. I'm 27, M2 for 3 years, not tickets/accidents, Triumph 675. Who do you recommend?

I will be there on the 10th and it would be great if somebody could share their canopy with me.

Sent a PM a while ago but didn't get a response...