Search results

20 times as expensive as my choice, or more. 50?

Either are good enough for me, to spray onto accumulated gunk on my swingarm and centre stand/sidestand, from gear oil flung off my chain. Whichever is cheapest.

What is the difference between mineral sprints and paint thinner...

I put Varsol or equivalent (generic Paint Thinner) into a spray bottle and spray it on the extra greasy bits. Varsol used to be cheap. It isn't now.

Her misuse of apostrophes should be a crime. She forgot to put one into guys and Falls.

Scam!

I rust proof mine and keep them for 20 years.

Maybe you could use something like a faucet wrench, if it would open up big enough. You could use a torque wrench at the top of the handle to drive it. You could also devise a similar tool with a small loop of chain or strap, if you want to get creative.

Sounds like a great family. My sincere condolences.

Rangers: Same fuel economy as F150, but half the usable space in both the cab and the box.

If it doesn't drip it hasn't been done properly. I'm not at all concerned about some drips on my gravel driveway.

Oil spray is the remedy. My 2008 F150 is still going strong at 250K km. She has a few scabs now after 17 winters, but the frame still looks like new with the original black paint on it, and the tailgate looks like new. I just changed the oil (it doesn't burn any) to get it ready for another...

https://www.cbc.ca/news/canada/toronto/muskoka-lakes-fatal-motorcycel-1.7622455 RIP

Pics please.

Take out the motors, add some ballast and create a nice dive site.

Apart from those two obvious differences, they are the same car. My cousin was a GM engineer.

My cousin in the states had a Holden that was branded as a Pontiac GTO.

My previous A 41 cupped worse than my present one. With this one I have upped the pressure in the front by about 3 PSI. Seems to be helping. I'm a heavy guy.

I got a couple of these from PA. Screw them to a 2X10 or 12 and you have a ramp. Works great for my lawn tractor. I always back up to a hill or a ditch somewhere to reduce slope. You could screw some expanded metal to your planks for traction...

Last time I needed some (very long ago) I found what I needed in their scrap bin. https://www.thefabricator.com/directory/showroom/expanded-metal-corp