Search results

I know all the dealers can order stuff, but I was wondering if anyone has been somewhere and saw a bunch in stock. I'm looking for a solid leather , or maybe textile cool weather jacket. I lost 105 lbs since the beginning of last riding reason ans am slowlt replacing most of my gear .

The front 2 holes are just key hole shaped openings. So just a big hole and a little hole, file , dremel , or die grind in between. The back hole is just and rectanglular hole (drill 4 holes cut, file ,or chew out between them) , with a spring loaded bolt to engage the half moon cut out in...

I believe on the 690 you have to replace the whole rocker . I am guessing yr bike would be the same. I think whole rocker is about 70 bucks US. If you need help you may want to call orange motosports in Colbourge . They seem to know what they are doing. If you check out...

The shims dont wear, the valves do. ! Thats why you have to change the shims to get the clearance back .

any auto parts store , like car quest, uap ect

I might try the following if you think its a write off. Take it off Strip all the rubber out of the caliper (remove the pistons and seals) Then gently warm the area around the pin . The aluminum will expand faster then the pin and it might help loosen it.l Also if you get the caliper on...

Used to do track days with it . Drove the car to and from the tracks

It's kind of like when I told my perspective insurance company that my 91 mustang had an updated/higher performance braking system. You would think that a 5 lug conversion and cobra r brakes would make the car safer, but is was straight to special risk insurance for me if I switched ...

Most of the premium goes toward accident benifit coverage , not physical damage .

There are useful for solo 1 and 2 , where they make you use a helmet in your car.

I went up there once a few years ago, it was ok. Out the roads we were getting the cops ahead signal every 2 minutes from other bikes we were meeting. I usually try to avoid places I know cops will be looking for bikes behaving badly . Of course I am aware there can be speed traps...

You know you can just strip some solid copper wire, use that for jumpers if you want.

Do not opp motorcycle cops have boom mikes on the side ? I have never had an issue with my collet communicators , had then for years,

What about spray welding harder material on then regrinding the cams ?

all i can say is WTF ..