There may be a liability thing, too. Owner presses the wrong button (or someone else drives the car and turns adaptive cruise off) then ... "I thought the car would stop when the traffic in front stopped, and it didn't".
HEL are very good, and has a Canadian distributor (among many international ones): Contact Us
Fancy stuff (Spanish company, owned by Brembo) J.Juan | Brake Systems
Ramcharger engine is chosen largely by "that's what's in production" plus a bit of "that's what people will accept" (marketing), plus also the use as a generator will allow it to run in a decently efficient operating range. Actual usage might seldom need 270 horsepower at 5000 rpm much, but that...
I'd be tempted to reconfigure your circuits to supply one 32A 240V EVSE and charge the Volt from a wall plug. You can always stick the Volt on the big charger for a short splash.
My Grizzl-E is set up at 24A 240VAC and it's always capable of fully charging my car overnight. Your battery is...
This same crap happens every time any company goes through administration (or restructuring or whatever you want to call it). Creditors and suppliers eat some of the losses and what happens next, varies. Some companies may be captive suppliers, organised as a separate corporation but with KTM as...
There are no guidelines for what constitutes a "community safety zone". It can be wherever a town council wants it to be. It can be wherever a noisy complainer complains to council enough. I can point to some pretty stupid ones.
Now, think MONEY. Long straight road engineered for fast traffic +...
Last time through Alton, I noticed that the entire camera box had been turned a few degrees to point it angled a little outward from the roadway, instead of aimed at the adjacent traffic lane.
Clever.
The snowplow must have hit it. I dunno. But, nicely done.
Scored liners explains the oil consumption and at least part of the low compression (poor valve sealing is probably the other part of it).
A good question is WHY the liners were scored. Overheating? Oil changes left too long?
That piston looks fine from here, so that is good news. If the cylinder walls look decent, potentially just have them refinished ("honed") and use new rings. Appears that this engine uses cast-iron liners, so this should be simple for someone who knows what they're doing.
Obviously, you found a...
You had better check with the experts on that. If the piston is the same part number then carry on. Otherwise, it needs to match or at least be compatible in many dimensions beyond just the bore size. Pin diameter, deck height, valve clearance pockets, shape of the skirts such that it clears the...
Today's mission in the Bolt was to watch some fellow SOAR bike people abuse crapbox cars on the ice in Minden. 210 km from home one way with one Flo charging station in Minden and the last one before that 87 km into the trip in Keswick. The one station in Minden is surrounded by a charging...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.