Search results

So I'm installing a jet kit for my bike and just realized that they sent me a kit for an 00-02zx6r, which I know bolt for bolt minus the fairing stay is the same bike, but then looking at dynojet PDF's the main jet replaced in the zzr is a different code than the zx6r (dj122 main jets for...

Good call on the shim swap. I swung by Snow City and Jeremy hooked me up with a couple of what I needed, sadly he didnt have all of them but Sandy ordered them up for me so they should be there by mon/tues. Also figured out my issue with getting proper clearance measurements (I was doin it...

Oh well, so it's better I just buy a shim kit than and fiddle around as opposed to a swap? 'Sides idk where to swap shims, that was gonna be one of my next questions. Is having clearances that tight a "normal" thing? I've already taken off the chain tensioner and the cover for the cams. Let...

Ok, jet kit hasn't come in yet, so I decided to get my valve clearance inspection started, so I bopped over to RD and got me a feeler gauge and went to town. Here's the numbers I got, the blanks in cylinder 2 and 4 are because my lowest feeler (0.05mm) would not fit. Here's my ranges - exhaust...

I put an LED to em, the carb cleaner cleaned it pretty good, saw perfect circle, but the jet kit replaces some of these parts, no?

What do they look like? I only removed what I could get a hold of with a flathead or a socket. There are parts I left within the body of the carbs I'll take pic when I get home I'm sitting in front of the go station Ok I'm here, can u tell with pics what I haven't removed as of yet? Here's a...

Will not be touching that sensor, hey Brian, where the hell was u when I was growing up, coulda kept me outta tons of trouble, lmao :) I got real lucky wit the stripped screw, I forgot I bought a grabit from crappy, yanked those bad boys quicker than a hillbilly tooth XD Cleaned up as much as I...

good call, went to crappy and found what I needed, but it was an m5 x08 or something like that. Fit perfect tho with a socket head so no more strippin that ******, lol. Diaphrams springs and needles out. However theres some sort of plug that sits on the end of the carbs that requires some sort...

Ok cool I will. Holy crap is it ever hot out there tho. Stripped two phillips screws taking off float covers, no biggie as the heads got enuff on em for me to get a grip on to remove it the hard way. Gonna take a break and head over to crappy or home depot see if i can find a better replacement...

I got the manual, the only things I'm missing and presently on a mission to get us the feeler guages(heading to RD to p/u after I find out who the babies daddys are, lol) and a shim kit, and RD says theyll have my jet kit on friday. I know I probably won't use alot of the shim kit but I can...

Flattered, its if he follows you ya got to worry! If your doing everything right anyway his video wont show much. Ive had people do this, I think they hope u wheelie or something so they can send it to CP24. I just speed up, if theyre filming you in bumper to bumper traffic that could be a bit...

Sorry just another question, while all this stuff is off the engine, should I be checkin the valve clearances? The only thing I'm missing to do this is a shim kit.

Wicked, thanks for the thorough instructions, I'm just getting up, dropped the wife at the GO, and somehow convinced her that this has to be done(well it really does, im just surprised I could convince her something on the bike needed to be done, lol) so I got nothing but time now, I'll update...

Ok Im sold, Im gonna give this a try, does anyone have a good DIY carb vid i could put on the laptop while I do this? Just pulled the tank and fairings off I'll get the real party started tommorow

It bounces from lets say if I can get it to the 1300 it flutters between there and 1500. I just took it for a quick boot around the block without earplugs so I could better hear the issues. At speed everything seems normal to me, but once I stop for red light or traffic the rpms get wobbily...

Good point. Im gonna stick with the original nuts, but my other issue, does anyone have any troubleshooting advice? Sorry if I should have started a fresh thread.

Awesome, thanks Brian I put the steel nuts on already so I can leave that bit as is:) Another question if u could help me, I got 29900 on the odo, I went for a boot yesterday to see how the new chain and sprocket felt, I noticed at a red light that my rpms were bouncing just below a grand at...

Im doing a chain and sprocket change on my 2007 zzr600. The service manual says the nuts holding the rear sprocket nuts should be 10mm, but mine are 14mm and everythings stock:confused: I want to buy different color sprocket nuts, but so far I havent found anyone selling them in 14mm, can I use...

My wife is doing the insanity vids now, trust me they work! The food guide meals are a little too complex if youre on the move all the time, just try and be reasonable with what u eat. Also the vids are hilarious cuz the people with Shaun T are constantly bonkin and looking goofy. You will get...

Did you guys hear about this training incident? Hope it's not repost http://m.torontosun.com/2012/06/12/motorcycle-lesson-turns-deadly-when-bike-hits-parking-garage-wall-ejects-rider-from-fifth-floor