Welder in Oakville

Chasem

Chasem

Well-known member
Forum Sponsor
Hey guys,

I was curious if anybody knows a welder or reputable shop in the Oakville area... I need to lower my kickstand by roughly an inch, and my Mig Welder is about 3 hours away from me (long story)

Tried contacting a local recommended shop called "Ace Moto Tech" several times... no response... *shrug*

Thanks!
 
Talk to Jim @ Full Fusion Welding. He's on Speers Rd. 416 737 8506 He's around most evenings. Tell him Berni sent you.
 
Chasem said:
Hey guys,

I was curious if anybody knows a welder or reputable shop in the Oakville area... I need to lower my kickstand by roughly an inch, and my Mig Welder is about 3 hours away from me (long story)

Tried contacting a local recommended shop called "Ace Moto Tech" several times... no response... *shrug*

Thanks!
Click to expand...
Ace moto never calls back I tired to get him so many time with no luck I would stay away who knows what type of service they have
 
Try Tripp cycle. He'll do it for you. Just south of speers next to third line. Talk to John.
 
I wanted to give a shout-out to Colin, who offered to weld/modify my kickstand at no cost. Even going as far to drive out of his way to meet me. I definitely wasn't expecting anything like that and it's a reminder genuinely nice people do exist. Ultimately I didn't go with him because the travel time/logistics was just too great.

Jim @ Full Fusion Welding modified my kickstand and I couldn't be happier. Got it shaved down 1 1/4 inches and a larger foot put on so it doesn't sink into the mud :D
UhFpEGy.jpg
Forum Sponsor
 
You must log in or register to reply here.
Back
Top Bottom