Headlight not working

[Brampton-F2]

Hi, I have a 93 CBR F2. Some reason the headlight stopped working and its not due to the headlight itself or the fuse, I checked both. I think its due to some wiring coming loose or is frayed somewhere. Is there a way to find the problem like with a voltmeter, to see where the fault is coming from or do I have to cut the taping and check each wire manually? Any help would be appreciated.

 

[mroberto]

Do you have a wiring diagram for the bike? Having that will make this job easier.

Grab a DMM and measure the voltage at the connector in the headlight (harness side). Then work back through the harness, going from connector to connector, until you get power on the headlight pins. That should help you narrow down which part of the harness to inspect closer.