Search results

Fork seal on my new 3500km fjr started leaking 2 dayd ago.. Seal mate solved the issue... Btw I tried using a piece of film, broke the corner off in the seal and then a lot of oil leaked out on the floor time I went and got the seal mate.... You can get 2 delivered from seal mate for 16cdn give...

Nice idea ! I usually add a drop of brake fluid under rubber boots , after the cleaning , to lube the pistons and seal as they are pushed back in . I don't think brake cleaner is a great lube ..

Here is the seal kit I think https://www.ebay.com/itm/KAWASAKI-EX250-1988-1990-1992-2006-REAR-BRAKE-CALIPER-SEALS-NINJA-250R/401353982026?epid=14004058654&hash=item5d728fc04a:g:CqoAAOSwN2VZUB8Z...

Maybe you can cross reference the piston diameters , and the caliper manufacturer and find a kit that has the correct seals and bellows .

I'm pretty sure they need to hold a valid M license as well ...

If you want to travel , I'm sure Scott Miller (fast company) in Kitchener could get it set up for you .

what about theses from Princess for 7 bucks ? Same idea, but more rubber to plug the hole ? https://www.princessauto.com/en/detail/2-pc-2-in-tire-plug-patch-kit/A-p8107708e

Fjr1300

Just use a drill , the same diameter as the bolt, or slightly larger . Drill the center and the head will com off, then pull off the bar end , and take what is left out with the vice grips , or a small pipe wrench.

Does anyone have a 2000 - 2010 R1 shifter arm they would like to part with ? I want it to shorten the throw on my FJR. Thanks

Look up Fast Company Kitchener or Breslau , Scott Miller. I would be surprised if there is anything he can't do, if he has time.

You can cheat the penetration issue a little by leaving a small gap between the materials you are welding..,,,,,

Contact yr old insurance company, good chance they will still have the records.. Sent from my SM-G903W using GTAMotorcycle.com mobile app

That crap will be do more damage to the sportbike communities reputation than can be undone in 5 years... Sent from my SM-G903W using GTAMotorcycle.com mobile app

You could also try moving that can mount to the inside of the hanger if you still have enough rear tire /swing arm clearance. Another option is to just space the whole right side fame out 1cm or what ever you need, and then get a longer cross bar made or that one extended . IF you want to...

If you cant get it spaced off enough to not worry , google muffler slider .. there are many versions, basically a heat resistant hose that wraps around yr can. https://moto-hose.myshopify.com/products/supermoto-road-race-products

A round face plastic hammer, and some soft wood to back it up might work best.

please delete , wrong section Sorry guys

Does an ex 250 have timing marks on the flywheel that can be seen by removing a plug ? I'm working on an bike that I suspect has a damaged cdi unit as the regulator was bad and fried the battery and a few bulbs. All of the fuses have benn checked and are fine . The bike runs with...

Does an ex 250 have timing marks on the flywheel that can be seen by removing a plug ? I'm working on an bike that I suspect has a damaged cdi unit as the regulator was bad and fried the battery and a few bulbs. All of the fuses have benn checked and are fine . The bike runs with...