Used Bike with no Mechanical Knowledge - Page 2

Page 2 of 2 FirstFirst 12
Results 21 to 22 of 22

Thread: Used Bike with no Mechanical Knowledge

  1. #21
    TwistedKestrel's Avatar
    Join Date
    Mar 2005

    Re: Used Bike with no Mechanical Knowledge

    Forum Sponsor
    Quote Originally Posted by Trials View Post
    So does that mean you have to buy all 4 throttle bodies just to get 1 TPS ?
    According to Honda, yes. However - the TPS is the same as one they've used on a number of their cars, which they still don't sell separately but it means it has plenty of knockoffs around. Once you find the correct one (has to look physically identical, basically - the wrong one which is much more common is mirrored) then you can drill out and/or slot the factory semi-permanent tamper resistant screws, replace the ****ing part, wiggle it until it reads correctly, finish the case of beer, securely screw the TPS back down, set the bike on fire
    2006 Honda CB919
    "Anything invented after you're thirty-five is against the natural order of things." -Douglas Adams

  2. #22

    Re: Used Bike with no Mechanical Knowledge

    Holy that must be almost like 3 or 4 times the cost it would be for a single

    Fuel filter for my 4RT's is only available when you order an entire fuel pump and they recommend you replace the 80$ rubber seal at the same time, that brings the parts cost to replace the fuel filter very close to 1000$ I needed one once after I plunged my bike into the lake :/ so it turned out cheaper to dry it out and trade-in the bike.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts