This thing is shaft drive, lol.
Amazing. Heel and toe shifting but no apparent clutch lever? That is a strange beast.
|
|
|
Bike recommendations needed. Specs: 2000s, Japanese, FI, shaft drive, not a cruiser
- Thread starter Admiral Beez
- Start date
Amazing. Heel and toe shifting but no apparent clutch lever? That is a strange beast.
BigEvilDoer
Well-known member
Mikbusa nailed it. Vfr1200. Bypass the power limiter for 1st and 2nd gear and it's a proper couch rocket.
Mad Mike
Well-known member
If you're looking for low maintenance sport tourer with FI and Shaft and lighter than an ST1300, my favorite is the FJR 1300. 90lbs less than an ST1300, cheap maintenance, and bulletproof dependability. You can also ride it without luggage.
It's reasonable to expect well maintained FJR to run past 200,000KM - many without a major repair. You can find 03's for less than $3, and about $5k for 04-07 with relatively low mileage.
Shaft drive is going to restrict the options, it's basically a bigger-bike feature.
It's reasonable to expect well maintained FJR to run past 200,000KM - many without a major repair. You can find 03's for less than $3, and about $5k for 04-07 with relatively low mileage.
Shaft drive is going to restrict the options, it's basically a bigger-bike feature.
wonderings
Well-known member
That is what I would recommend and the weight will not be noticeable unless you drop it.
If you can drop a decade off and go european, the same guy is also selling a K1. Side note, that has to be the smallest integrated luggage ever produced.
https://www.kijiji.ca/v-motorcycle-other/st-catharines/selling-1990-bmw-k1/1293982848
It's the lightest feeling 590 lb bike out there. I swapped with a friend, and busa and vfr are damn near same weight, but the vfr felt 150 lbs lighter. Weight is slung really low.
They should have brought in the VFR800x CrossRunner
Still porky compared the CBF1000 but 60 lb less than the 1200.
but I still think the knee bend is too high.
Still porky compared the CBF1000 but 60 lb less than the 1200.
but I still think the knee bend is too high.
|
|
|
|
|