Need copper crush washers - Where to find???

movistardave · May 20, 2016

Hi guys, Im looking for some copper crush washers for my banjo bolts. Size is 10mm ID and 1mm thick. Any idea where to get them?

Thanks!

Jayv · May 20, 2016

Dave,

Local honda dealer, car or auto.

90545-300-000

meme · May 20, 2016

Jesus Jay you rock.

Prob have a few kicking around toolbox if you get needy also.

xplorer · May 20, 2016

princess auto has a piece of kit
http://www.princessauto.com/en/detail/110-pc-copper-washer-kit/A-p8092215e

bitzz · May 20, 2016

xplorer said:
princess auto has a piece of kit
http://www.princessauto.com/en/detail/110-pc-copper-washer-kit/A-p8092215e

Those are way too big for brake hose banjos.

For the OP: You don't have to replace them, you just anneal them and re-use. They last forever.

dricked · May 20, 2016

bitzz said:
Those are way too big for brake hose banjos.

For the OP: You don't have to replace them, you just anneal them and re-use. They last forever.

There is one size in there that could work in a pinch on bikes. I replaced the ones on my car with these as they were a good fit.

Wingboy · May 20, 2016

Regional Hose will have it,or can get it.

Turbonutt · May 20, 2016

They'll (Regional) get them from my work, Williams Fluidair in Pickering. We've got a couple thousand in stock, $0.20 each. If you're in the Toronto area for see Derek at Regional, he's a good guy

Koval_68 · May 20, 2016

Any car mechanic can get those copper washers for you from Wurth.

basmn · May 25, 2016

Performance improvements has them. I bought the aluminum ones and they work great.

Need copper crush washers - Where to find???

movistardave

Well-known member

Jayv

Well-known member

meme

Well-known member

xplorer

Well-known member

bitzz

Well-known member

dricked

Well-known member

Wingboy

Well-known member

Turbonutt

Well-known member

Koval_68

Well-known member

basmn

Well-known member