Have to finally get rid of this track toy. I'm moving towards dirt riding and unfortunately, this beast is lounging around in the garage unused.
Now is the opportunity to pick up a completely setup track bike. Just turn the key and go! The engine is strong and this is more bike than I will ever have the skill to max out.
If you're looking to race it, it's fully prepped (drilled for racing) as well and would be perfect for the Lost Era classes.
Here's a list of the mods.
- Keyless ignition
- 4 cell Lithium battery
- Forks upgraded with Ohlins 20mm valve kit (rebuilt by John Sharrard (May 17, 2010) for a 200lb rider (.95 Racetec spring in left leg and 1.0 Ohlins spring in right leg)
- Ohlins steering damper (rebuilt by John Sharrard @ Accelerated Technologies on Jan 2010)
- EBC wave rotors
- Steel braided brake lines front and rear
- STM slipper clutch
- BMC air filter
- New Iridium plugs with less than a season on them
- Woodcraft clutch cover slider
- Yoshimura Magnesium stator cover
- NCR Idler cover
- Woodcraft sliders
- Vortex gas cap
- Vortex rearsets
- Aftermarket clip ons with spare set of clip on tubes
- Full M4 exhaust system (header to exhaust can)
- Power Commander III USB
- TRE
- R6 Throttle Tube mod – converts from quarter turn to fifth turn throttle
- K&N filter
- Frame has been certified as straight by GMD Computrack in Mississauga (Dec 2008) hasn’t been down since
- New bearings, head (tapered bearings) and swingarm (Dec 2008)
- Stomp tank grips
- Currently setup to GP shift
- Will come with a set of Pitbull TRS pins
Parts and Spares:
- Spare gas tank with fuel pump
- Stock gas cap – tumbler removed
- 2 sets of stock levers
- Brake fluid reservoir
- Brake master – elbow connector
- Spare Vortex rearsets (slightly rashed)
- 2 spare OEM stator covers
- 1 spare OEM idler cover
- 2 set of brand new sintered brake pads (find out what makes it is)
- Set of Pazzo shorty levers included
- Spare Yosh (???) slip on exhaust
- Extra set of rims with rains mounted
- 2 spare cush drives
- Extra sprocket carriers and assorted sprockets
- Spare set of ram air tubes
- 2 Spare upper fairing and super bike tail fairing
- Spare instrument cluster
- 2 Spare bird cages, one brand new and another tweaked
- Included will be assortment of rotors
Link to pics and ad on Kijiji
http://www.kijiji.ca/v-view-details.html?adId=1159760698&siteLocale=en_CA&adActivated=true&posted=true
Now is the opportunity to pick up a completely setup track bike. Just turn the key and go! The engine is strong and this is more bike than I will ever have the skill to max out.
If you're looking to race it, it's fully prepped (drilled for racing) as well and would be perfect for the Lost Era classes.
Here's a list of the mods.
- Keyless ignition
- 4 cell Lithium battery
- Forks upgraded with Ohlins 20mm valve kit (rebuilt by John Sharrard (May 17, 2010) for a 200lb rider (.95 Racetec spring in left leg and 1.0 Ohlins spring in right leg)
- Ohlins steering damper (rebuilt by John Sharrard @ Accelerated Technologies on Jan 2010)
- EBC wave rotors
- Steel braided brake lines front and rear
- STM slipper clutch
- BMC air filter
- New Iridium plugs with less than a season on them
- Woodcraft clutch cover slider
- Yoshimura Magnesium stator cover
- NCR Idler cover
- Woodcraft sliders
- Vortex gas cap
- Vortex rearsets
- Aftermarket clip ons with spare set of clip on tubes
- Full M4 exhaust system (header to exhaust can)
- Power Commander III USB
- TRE
- R6 Throttle Tube mod – converts from quarter turn to fifth turn throttle
- K&N filter
- Frame has been certified as straight by GMD Computrack in Mississauga (Dec 2008) hasn’t been down since
- New bearings, head (tapered bearings) and swingarm (Dec 2008)
- Stomp tank grips
- Currently setup to GP shift
- Will come with a set of Pitbull TRS pins
Parts and Spares:
- Spare gas tank with fuel pump
- Stock gas cap – tumbler removed
- 2 sets of stock levers
- Brake fluid reservoir
- Brake master – elbow connector
- Spare Vortex rearsets (slightly rashed)
- 2 spare OEM stator covers
- 1 spare OEM idler cover
- 2 set of brand new sintered brake pads (find out what makes it is)
- Set of Pazzo shorty levers included
- Spare Yosh (???) slip on exhaust
- Extra set of rims with rains mounted
- 2 spare cush drives
- Extra sprocket carriers and assorted sprockets
- Spare set of ram air tubes
- 2 Spare upper fairing and super bike tail fairing
- Spare instrument cluster
- 2 Spare bird cages, one brand new and another tweaked
- Included will be assortment of rotors
Link to pics and ad on Kijiji
http://www.kijiji.ca/v-view-details.html?adId=1159760698&siteLocale=en_CA&adActivated=true&posted=true