Moto-Master 320mm Front Rotor and Caliper Bracket BNIB (KTM, Husaberg, Husqvarna) | GTAMotorcycle.com

Moto-Master 320mm Front Rotor and Caliper Bracket BNIB (KTM, Husaberg, Husqvarna)

supermoto101

New member
2 -Brand New Moto-master 320mm Supermoto front rotors. These are 4mm thick and floating type. I also have one caliper relocation bracket which works with the stock front caliper to relocate it outward to accommodate the larger rotor diameter.

The best rotor fitment listing I could find goes up to 2014:
HUSABERG – All Off-Road models 2000-2014
HUSQVARNA 125cc-501cc 2014 only
KTM – All Off-Road models 1992-2014

Specs
Outer diameter: 320.0 mm
Inner Diameter: 126.5 mm
Number of holes: 6
Hole diameter: 6.5 mm
Pitch: 143.0 mm
Disc type: Floating disc with steel inner carrier

People smarter than me will chime in to say if the wheels on 2015 and 2016 models are the same as 2014 and older. If nothing changed in the last couple of years then you should be good to go on the newest bikes.

Caliper relocation bracket:
It is marked "SM-302" on it and that seems to cross over to Moto-master part number 211013.
Click or copy paste this link to get to the Moto-master fitment of that bracket.
http://products.moto-master.com/product/155598/211013-caliper-adapter-bracket
Listed to fit most KTM and all Husaberg models from 00-08.

A very good deal at retail is currently $350.00 USD (rotor-bracket combo) plus freight, 30% exchange -yada yada

The bracket by itself is listed at $115.00 USD

I'm thinking $300.00 for the combo and $220.00 for the other rotor alone.

attachment.php
attachment.php


 

Attachments

  • FullSizeRender 2.jpg
    FullSizeRender 2.jpg
    90.3 KB · Views: 24
  • FullSizeRender.jpg
    FullSizeRender.jpg
    91.1 KB · Views: 26
Last edited:

Back
Top Bottom