nasty_north
Member
| I Purchased these GSXR750 Mikuni BST36 SS for $250 off ebay hoping they would fit on my 750 honda but i decided to stick with my stock carbs. Don't want to be hassled with cylinder spacing. I think it had 110 & 125 mains, not too sure i didnt pay attention to needle or emulsion tube stamps as i was planning on installing a Dynojet kit. They have been thoroughly cleaned, floats are adjusted and tested to factory spec. installed New fuel Tee gaskets, otherwise all the other rubber was perfect. I have tapped the idle mixture screws so if your running aftermarket exhaust or pod filters you can properly tune idle. carbs have been painted with self etching primer and high temp flat black paint. I also have matching pod filters if you are interested. having trouble posting pics so i can e-mail you some ! thanks. i live by kennedy & 401 scarborough thanks |
Last edited: