So after experiencing the same coil/spark plug wire/plug cap issues a bunch of times, I decided to upgrade everything. Got a Dynatek kit.
These Dyna coils have two issues:
I asked the Interwebs and some guys just use hose clamps to secure the coils to the frame. Seems like a reasonable solution, but the one concern I have is the ground wire that used to be attached to one of the coils' mounting posts. Can I just relocate it to one coil's primary lead, i.e. one side of the 12v connector? Or is this a bad idea?
I don't know about these things.
These Dyna coils have two issues:
- They're too big to mount in the original bracket
- The mounting holes are at a 90-degree angle from the OEM coils.
I asked the Interwebs and some guys just use hose clamps to secure the coils to the frame. Seems like a reasonable solution, but the one concern I have is the ground wire that used to be attached to one of the coils' mounting posts. Can I just relocate it to one coil's primary lead, i.e. one side of the 12v connector? Or is this a bad idea?
I don't know about these things.