Grizzly G4000 metal lathe
http://www.grizzly.com/products/9-x-19-Bench-Lathe/G4000
Specifications:
Swing over bed: 8-3/4"
Swing over cross slide: 5"
Distance between centers: 19"
Spindle bore: 3/4"
Spindle nose taper: MT #3
Motor: 3/4 HP, 110V, single-phase
Number of speeds: 6
Range of speeds: 130, 300, 400, 600, 1000, 2000 RPM
Leadscrew: 9/16"–16 TPI
Compound travel: 1-7/8"
Cross slide travel: 4-1/4"
Carriage travel: 16"
Maximum tool size: 1/2"
Tailstock barrel travel: 1-9/16"
Tailstock barrel taper: MT #2
Number of longitudinal feeds: 18
Range of longitudinal feeds: 0.0047–0.012 IPR
Number of inch threads: 27
Range of inch threads: 8–56 TPI
Number of metric threads:11
Range of metric threads: 0.5–3.0mm
Overall dimensions: 37" L x 20" W x 15" H
Standard Equipment:
4" 3-Jaw chuck with two sets of jaws
7-1/4" 4-Jaw chuck with reversible jaws
Steady rest
Follow rest
MT #2 dead center
MT #3 dead center
MT #2 live center
4-way tool post
Faceplate
Extra C-type tool post
Tool box & tool kit
Optional Equipment:
Grizzly stand included
Full length "under" tray included
Full length back guard included
$700
Floor Drill Press:
Jet JDP13F
http://www.kbctools.ca/default.aspx?page=item detail&itemcode=3-001C-200275
Powerful 3/4 horse power motor.
16 speeds for maximum versatility.
Built-in work lamp with separate switch.
5/8" drilling capacity.
Spindle Taper/Travel 2MT/3-1/8".
Hydro approval of electrical system.
115V / 1 PH.
The quill bearings have been upgraded to SKF Explorer
$250
Buy them both and I'll throw in a low profile drill press vice, a set of custom carbide tool holders for the lathe and a dial indicator with stand.
Located in Mississauga. Delivery can be arranged.
email is best
jim at bitzz dot com
http://www.grizzly.com/products/9-x-19-Bench-Lathe/G4000
Specifications:
Swing over bed: 8-3/4"
Swing over cross slide: 5"
Distance between centers: 19"
Spindle bore: 3/4"
Spindle nose taper: MT #3
Motor: 3/4 HP, 110V, single-phase
Number of speeds: 6
Range of speeds: 130, 300, 400, 600, 1000, 2000 RPM
Leadscrew: 9/16"–16 TPI
Compound travel: 1-7/8"
Cross slide travel: 4-1/4"
Carriage travel: 16"
Maximum tool size: 1/2"
Tailstock barrel travel: 1-9/16"
Tailstock barrel taper: MT #2
Number of longitudinal feeds: 18
Range of longitudinal feeds: 0.0047–0.012 IPR
Number of inch threads: 27
Range of inch threads: 8–56 TPI
Number of metric threads:11
Range of metric threads: 0.5–3.0mm
Overall dimensions: 37" L x 20" W x 15" H
Standard Equipment:
4" 3-Jaw chuck with two sets of jaws
7-1/4" 4-Jaw chuck with reversible jaws
Steady rest
Follow rest
MT #2 dead center
MT #3 dead center
MT #2 live center
4-way tool post
Faceplate
Extra C-type tool post
Tool box & tool kit
Optional Equipment:
Grizzly stand included
Full length "under" tray included
Full length back guard included
$700
Floor Drill Press:
Jet JDP13F
http://www.kbctools.ca/default.aspx?page=item detail&itemcode=3-001C-200275
Powerful 3/4 horse power motor.
16 speeds for maximum versatility.
Built-in work lamp with separate switch.
5/8" drilling capacity.
Spindle Taper/Travel 2MT/3-1/8".
Hydro approval of electrical system.
115V / 1 PH.
The quill bearings have been upgraded to SKF Explorer
$250
Buy them both and I'll throw in a low profile drill press vice, a set of custom carbide tool holders for the lathe and a dial indicator with stand.
Located in Mississauga. Delivery can be arranged.
email is best
jim at bitzz dot com