Fork extender cap tool | GTAMotorcycle.com

Fork extender cap tool

gixxer_fan

Well-known member
Does anyone in the Kitchener Waterloo area have a tool for removing fork extender caps that I could may borrow for a few days while I finish a refresh on my fork seals? Its for a gsxr if that matters

Or does anyone know where I can get one?

Ive attached a picture of the caps I have

Thanks

Sent from my Galaxy phone
 
Sorry taptalk said it was uploaded. Lets try this agian

20150412_164041_zpskjqx7gdy.jpg


Sent from my Galaxy phone
 
they should not be on very tight.
why not take the top triple clamp off completely, rotate it and make sure it is clamped only to the extender.
the fork tube itself is still held by the lower triple clamp.
use the upper triple clamp as a wrench. obviously you will have rotated it and clamped it to the cap in such a way that you can loosen the cap 1/4 turn at a time.
 
Oh perfect. That is the one I originally saw on harbor freight after searching on gixxer.com and figured I'd look for something similar here but cdn tire seemed to be only option

Sent from my Galaxy phone
 

Back
Top Bottom