Sandblasting in the GTA / Durham region | GTAMotorcycle.com

Sandblasting in the GTA / Durham region

G

Garage_Guy_Chris

Active member
Hi everybody

Im in need of some sandblasting services in the GTA or Durham region to strip the frame, swingarm and gas tank on my vintage project. Obviously I need someone that will be careful as to not obliterate the VIN or blast bearing races or warp the tank, and dumb stuff like that. I have been searching but havent come up with much. So all suggestions welcome.


.
 
Last edited:
Kneedraggers name would come up if u search the right topic like powder coating. As sandblasting is usually part of the process
 
Not anymore I used to dayjob at an aerospace plant and had access to lots of different machines, soda,glass,plastic,walnut and various grit. Now just have a small booth in my shop cant do a frame, swinger and tank can likely manage though.
 
Stafford Monuments on Dundas Street in Whitby. Go around back to the sandblasting shop.

Done many frames and tanks for me. You will have to remove the bearings though
 
Last edited:
If you don't mind Mississauga - SodaPro. Much more gentle on the metal than sand.
 
Delboy said:
Stafford Monuments on Dundas Street in Whitby. Go around back to the sandblasting shop.

Done many frames and tanks for me. You will have to remove the bearings though
Click to expand...

What would it run you to have a frame done? I'm looking at having one done too.
 
You must log in or register to reply here.

Back
Top Bottom