Installed my Delkevic 18" Stainless Steel Oval Exhaust | GTAMotorcycle.com

Installed my Delkevic 18" Stainless Steel Oval Exhaust

BrownBrady

BrownBrady

Well-known member
Just posting my video installation of my Delkevic 18" Stainless Steel Oval Exhaust on my 2013 Honda CBR250RA. It looks 90's but it was just what I was looking for. The sound was also what I was hoping for. It is not as loud as a shorter exhaust, but I still wouldn't start the bike at 3 AM. I did a sound meter test of the stock exhaust, my lawn mower, and the Delkevik exhaust, but my app looks like it had a 90 db limit lol. I also did a couple of flybys in the vid to hear what it kind of sounds like. Anyway, thanks for watching.

[video=youtube;mmUHbBKqvD8]https://www.youtube.com/watch?v=mmUHbBKqvD8[/video]

https://www.youtube.com/watch?v=mmUHbBKqvD8
 
Last edited:
Great job, BrownBrady!

It might not be too late but you can probably still do this.

Ideally after installing a SS exhaust you would like to clean the exhaust with rubbing alcohol to remove the fingers prints before starting up the bike.

Give it a nice wipe down when exhaust is cool down :) Sounds great btw!
 
Nice video!! I do a lot of installation of things to my motorcycles over the years. Nice to see someone have the time to do this :)

A couple of comments
* Get the Service manual for your bike - will be handy and you also will have the Torque settings!!
* I installed a Slipon on a GSX650F once. I had to adjust the throttle bodies/TPS for the EFI. It helps reduce the poping on acceleration. Many bikes have maps you can download to your bike's ECU for the specific pipe. Ie. TuneBoy/TuneECU

cheers
 
Last edited:
You must log in or register to reply here.

Back
Top Bottom