Guys please help -1998 ZX6R problem-Hamilton

[galvanize]

Whats the air burp filter? Get the bike on level ground and check the dipstick, i think you might have overfilled it... I always put a little less than the recommended amount of oil in because engines never get completely dry unless theyre really hot and you let it sit up for about an hour or so.

Coils and voltage regular probably wouldnt just go bad unless you know something youre not telling us. Id check all the easy and free things first because you go dropping money... But thats just me.

Because kawasaki screwup something on this model 1998-2002 horizontal mounted filter you must release air or oil light will stay ON ''Loosen the oil filter and start bike. The oil should come pouring between the filter and engine block. Tighten filter'' (this is called BURP)--this is from kawasaki forum--, and I bought this bike this spring and I dont know anything related to previous problems if there is any. Honestly Im not bike expert Im nurse LOL, but hey thanks for replying

[galvanize]

I am pretty sure his bike needs 3.6L. I have the previous model to his and mine calls for that much. It's because they have oil coolers (at least mind does).

Yes you right according to owners manual its 3.6 L when you change filter and in my case I did change my filter.

[kellen]

Because kawasaki screwup something on this model 1998-2002 horizontal mounted filter you must release air or oil light will stay ON ''Loosen the oil filter and start bike. The oil should come pouring between the filter and engine block. Tighten filter'' (this is called BURP)--this is from kawasaki forum--, and I bought this bike this spring and I dont know anything related to previous problems if there is any. Honestly Im not bike expert Im nurse LOL, but hey thanks for replying

yikes I never did that on my 01, never even heard of that. no oil light on

[galvanize]

yikes I never did that on my 01, never even heard of that. no oil light on

hahaha well thats good, no they say that may not be on every zx6r 1998-2002 but its possible and need to be aware of that, but hey thats what I read on kawasaki forum and internet who knows LOL
This is sample and there is bunch of that related to zx-r 1998-2002:
http://kawasakiworld.com/zx-12r/3830...-psi-help.html

cheers

[stevestang]

hey galvanize what colour is your 98 kawi?

[galvanize]

hey galvanize what colour is your 98 kawi?

Green purple standard colors for G1

[shicksr6]

I'd really make sure the plug gaps is correct and that all your wires are seating properly.

[galvanize]

I'd really make sure the plug gaps is correct and that all your wires are seating properly.

I try all that allready and it seems that I have to take bike to the mechanic

[rich6969]

i am in hamilton i can swing by and have a look if you want.....

[galvanize]

i am in hamilton i can swing by and have a look if you want.....

Sure will send you PM

[bobjohnson]

Did you check the oil again after you "burped" it? Maybe you "burped" out too much oil... I can see the idea behind it but that sounds... wrong. Couldnt you just fill up the filter with oil before putting it on? Lots of things have horizontal mount filters and ive never heard of having to burp them...

[galvanize]

Did you check the oil again after you "burped" it? Maybe you "burped" out too much oil... I can see the idea behind it but that sounds... wrong. Couldnt you just fill up the filter with oil before putting it on? Lots of things have horizontal mount filters and ive never heard of having to burp them...

Yeah I add some oil after I burp filter and it was runing fine but after I change my plugs everything goes wrong

[toybm]

Could it be that your oil and plugs are OK and the problem is the connection to your fuel tank? I assume you had to remove it to get at the plugs. Check the fuel lines and any electrical connections that you may have came across while under there.

[galvanize]

OK my bike is crazy, today not even to start, all I can hear is loud click under my seat when I try to start

[Freestyle72]

OK my bike is crazy, today not even to start, all I can hear is loud click under my seat when I try to start

Charge your battery...

And now that I think about it I heard a low battery can cause crappy running as well. If you don't have a charger I live in hamilton and would be more than happy to lend you my battery tender for a couple days.

[galvanize]

Charge your battery...

And now that I think about it I heard a low battery can cause crappy running as well. If you don't have a charger I live in hamilton and would be more than happy to lend you my battery tender for a couple days.

Hey bud, today I get brand new battery and guy told me it could be bad plug, so I check , and cylinder number 4 doesn't work I mean exhaust is cold on that cylinder, and again I get new plug take everything apart etc.. I was hope that would fix my problem but not, now it could be carbs but I have no idea how to clean carbs hahaha or something else ...

[Freestyle72]

I can help you pull your carbs and clean them... But is cyl # 4 firing now after you put new plug in?

[tondoboy]

check for sparks, if no spark on #4, could be ignition wire faulty......

[galvanize]

I can help you pull your carbs and clean them... But is cyl # 4 firing now after you put new plug in?

It was kind of late when I finished all this today so I just put all together again but if you wanna stop by and take a look be my guest

[galvanize]

check for sparks, if no spark on #4, could be ignition wire faulty......

Its possible, wire might be problem too but its not coil I know that because only #4 not running, maybe you right