Need to borrow for one day, rotor puller

[SiNNeR]

i need to split the crank case on a 1978 CB 400 twin.


and i need to pull the generator rotor off the crank..

i live in whitby, is there anyone who has one close by?
if you do have one and not sure if it will work for my appllication,, i need

18mm x 1.5 R.H. RIGHT HAND THREAD

i went to princess auto, seems the "universal" model has been discontinued... real bummer as it was only 12 bucks....

if anyone can help it would be greatly apreciated.

thanks

[Car2Slo]

Candian Tire also lends out pulley pullers and various auto parts. You may be able to get a car one to work if they let you look at the different models. Just ask at the parts department and it's lent for free, just have to leave a deposit so you return it.

[SiNNeR]

Candian Tire also lends out pulley pullers and various auto parts. You may be able to get a car one to work if they let you look at the different models. Just ask at the parts department and it's lent for free, just have to leave a deposit so you return it.

they dont have this tool

essentialy its a 18 mm bolt...

[bitzz]

I don't know if your bike is old enough but with old Hondas you use the front axle as a puller.

[SiNNeR]

I don't know if your bike is old enough but with old Hondas you use the front axle as a puller.

that would be a great engineered capabilty,

but i dont think it can. pretty sure this not the right mm size,
but i'm certainly gona check when i get home!

cheers

[JamieVk]

Same kind that you gave me with the bike? You still work down town?

[SiNNeR]

Same kind that you gave me with the bike? You still work down town?

yeah its that one,

but i custom cut that one to work with the FZ..
i donno, if i chopped the side i need.

but yes i still work downtown..

[SiNNeR]

I don't know if your bike is old enough but with old Hondas you use the front axle as a puller.

bmmer doesnt work way to small

[JamieVk]

yeah its that one,

but i custom cut that one to work with the FZ..
i donno, if i chopped the side i need.

but yes i still work downtown..

Well I could always give it to a buddy that works dt and you can try it out.
e-mail me jamie.vankooten@wolseleyinc.ca

[SiNNeR]

Well I could always give it to a buddy that works dt and you can try it out.
e-mail me jamie.vankooten@wolseleyinc.ca

no worries Jamie thanks for the offer,
i just ended up buyin one from motion pro.

just came in today!
time to split that 30 year old engine in half.