PASSENGER PEG SIGNALS
I thought these would help make me a bit more visible to traffic and it gave me something to do this winter!
If anyone's wondering, I just wired the6 LEDs in series with a 100 ohm resistor and then wired that entire circuit in parallel with the other signals. This should be safe for the LEDs up to 14V.
video- http://www.youtube.com/watch?v=b1SP-N_u28Y
Board with LEDs soldered on
Drilled peg assy.
LEDs hot glued into the peg assy.
Total Cost:
50 UltraBright Amber 3mm LEDs - $10
PCB- $3
Wire, Solder, Hot Glue, Drill- Had lying around
Bookmarks