04' 636 Ninja Parts



Page 1 of 2 12 LastLast
Results 1 to 20 of 23

Thread: 04' 636 Ninja Parts

  1. #1

    Smile 04' 636 Ninja Parts - ITS A PART OUT! -> Take a look

    EDIT: Should have mentioned that I would like to try and sell the whole lot at once...... so if you want it all/majority of it PM me- you can honestly put together a stunt bike from all of this. Thats what I and my friend planned to do so he has a bike, unfortunately a tragedy cut all of his plans short and he wont be needing the bike where he is at now...


    I got a whole Ninja 636 in parts all over my garage (minus the forks).

    Anybody wants to purchase them? Engine is ready to be bolted in (4k on it)

    Frame has a ding in it but got a clean title (ONTARIO) and its in my name.

    Wheels
    Tires
    sprockets
    Speedo
    subframe
    Shock

    VERYTHING YOU NEED TO PUT TOGETHER A 636 - minus the forks.

    Anyhow..... if someone wants it, PM me your offer.


    PART OUT IT IS!

    FRAME IS SOLD ___________everything else must go =)
    Last edited by drzdemon; 02-08-2010 at 04:11 PM.

  2. #2

    Re: 04' 636 Ninja Parts

    PM me with what you want for the motor please

  3. #3
    jackson's Avatar
    Join Date
    Oct 2006
    Location
    04 636
    Posts
    371

    Re: 04' 636 Ninja Parts

    Quote Originally Posted by drzdemon View Post
    EDIT: Should have mentioned that I would like to try and sell the whole lot at once...... so if you want it all/majority of it PM me- you can honestly put together a stunt bike from all of this. Thats what I and my friend planned to do so he has a bike, unfortunately a tragedy cut all of his plans short and he wont be needing the bike where he is at now...


    I got a whole Ninja 636 in parts all over my garage (minus the forks).

    Anybody wants to purchase them? Engine is ready to be bolted in (4k on it)

    Frame has a ding in it but got a clean title (ONTARIO) and its in my name.

    Wheels
    Tires
    sprockets
    Speedo
    subframe
    Shock

    VERYTHING YOU NEED TO PUT TOGETHER A 636 - minus the forks.

    Anyhow..... if someone wants it, PM me your offer.
    Pm sent!
    Where My Rode Dawgs At!!

  4. #4

    Join Date
    Jul 2005
    Location
    at work
    Posts
    1,357

    Re: 04' 636 Ninja Parts

    I have forks...

  5. #5

    Re: 04' 636 Ninja Parts

    Quote Originally Posted by AC View Post
    I have forks...
    Not more then me! I got best price on 03/04 forks...BEST PRICE!

  6. #6

    Re: 04' 636 Ninja Parts

    Ok, so so far I got much more interest on parting the thing out then selling it as a "bike kit" =)

    I had some interest in the package deal, so im waitin to see if we can close the deal with the person or if I get another offer meanwhile. If not, i will sell it all in pieces....

    Offers are accepted for the lot till the weekend- then its part out time.

    Thanks for staying tuned.

  7. #7

    Join Date
    May 2006
    Location
    416
    Posts
    1,581

    Re: 04' 636 Ninja Parts

    Hoping for the part out and hoping you got my pm before lol

  8. #8
    andyztoy's Avatar
    Join Date
    Jan 2008
    Location
    whitby
    Posts
    230

    Re: 04' 636 Ninja Parts

    johny636 and AC have more 636 parts then the Kawasaki factory in Japan

  9. #9
    hondacbrf3's Avatar
    Join Date
    Dec 2006
    Location
    NINJA(J.P EDITION) A certified ninja
    Posts
    890

    Re: 04' 636 Ninja Parts

    I don't know houw much you are looking to get for the bike when you paid less than 4gs for two bikes... I will offer you 2 grand for the whole thing....

  10. #10

    Re: 04' 636 Ninja Parts

    Frame is sold now gotta move the rest.

    head light (missing a few tabs) -150
    motor w/ radiator, throttles and all the wiring/CDI etc... (just needs to be bolted on)-1000
    rider seat-60
    stock passenger pegs-60
    stock rear sets-60
    CFMotorsports rear sets with shifter and brake lever - 120
    Orange tank with fuel pump (has a dent - if you gonna stunt and ding in ur tank you wont care)-200
    windscreen-50
    clip ons with controls-140
    swing arm-100
    front wheel w/ rotors and good tire-250
    rear wheel w/ rotor and stock sprocket-250
    front calipers + lines and master cylinder/lever-200
    rear caliper-60
    top tripple-60
    lower tripple-60
    speedo/guages-200 (will try to hook it up to see milage)
    streight subframe-180
    upper stay (holds the mirrors) -80
    rear wheel hugger-25
    stock tail light-30
    Vortex sprocket 51 tooth - 50
    front stock sprocket - 20
    Orange SOLO seat cowl - 100
    Shock - 100



















    Probably forgeting something.... if you need something and its not listed just ask.
    Last edited by drzdemon; 02-08-2010 at 03:57 PM.

  11. #11

    Re: 04' 636 Ninja Parts

    Here some of the extra info most questions were about....

    The FRAME IS SOLD - Dont have it no more.
    The fairings I am keeping for now.

    I am located around Vaughan Mills/Wonderland.

    We can arrange to meet up somewhere half way - especialy if you are purchasing a significant amount of parts.

    To get my phone number just PM me.

    Thanks

  12. #12

    Re: 04' 636 Ninja Parts

    The following items are SOLD:
    Frame
    CFM rearsets
    Seat Cowl (solo)
    Windscreen
    Both mirrors
    Stock Rider Pegs (rearset)

    Everything else remains for sale!!!
    Last edited by drzdemon; 03-04-2010 at 05:25 AM. Reason: More sold Items

  13. #13

    Re: 04' 636 Ninja Parts

    Still have the speedo?

  14. #14

    Re: 04' 636 Ninja Parts

    Quote Originally Posted by Decepticon View Post
    Still have the speedo?
    Speedo is SOLD

    Here is the updated list:


    head light (missing a few tabs) -150
    motor w/ radiator, throttles and all the wiring/CDI etc... (just needs to be bolted on)-1000
    stock passenger pegs-60
    clip ons with controls-140
    swing arm-100
    front wheel w/ rotors and good tire-250
    rear wheel w/ rotor and stock sprocket and tire-250
    rear caliper-60
    streight subframe-180
    upper stay (holds the mirrors) -80
    rear wheel hugger-40
    Vortex sprocket 51 tooth - 50
    front stock sprocket - 20
    Orange SOLO seat cowl - 100
    Shock - 100

    Also got ORANGE fairings for sale - left/right/tail/undertail

  15. #15
    r6onspray's Avatar
    Join Date
    Aug 2007
    Location
    t.dot
    Posts
    110

    Re: 04' 636 Ninja Parts

    He's also sellin Durtys old stunt bike on kijiji for 5600! Lol thousands more then he paid for both ....

  16. #16

    Re: 04' 636 Ninja Parts

    Quote Originally Posted by r6onspray View Post
    He's also sellin Durtys old stunt bike on kijiji for 5600! Lol thousands more then he paid for both ....
    You got that right.

    negotiable =)

  17. #17

    Re: 04' 636 Ninja Parts

    How much for the fairings?

  18. #18

    Re: 04' 636 Ninja Parts

    anybody know if 05 model and 04 model share same wiring? i need a voltage regulator but its for 05

  19. #19

    Join Date
    Jul 2005
    Location
    at work
    Posts
    1,357

    Re: 04' 636 Ninja Parts

    not the same plugs, but not sure if you can change the plugs from one year to the next..

  20. #20

    Re: 04' 636 Ninja Parts

    Quote Originally Posted by AC View Post
    not the same plugs, but not sure if you can change the plugs from one year to the next..
    Same part different plugs, you can use it if you go through the trouble of rewiring it or changing the plugs

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •