1996 Gsxr wont Start Help !

[jspecef9]

yeh most likely, went to start it today , didnt fire up , i pulled the tank off , cylinder 1 and 2 throtle boddies were soaked with fuel tried starting it fired up and ran and IDLE'd by it self for a good minute :S, really weird, wha im guessing is the float needles were siezed i had to use a pin to get them out, most likely the rubber piece on the end of it got damaged and thats wha most likely the problem is

[frekeyguy]

yeh most likely, went to start it today , didnt fire up , i pulled the tank off , cylinder 1 and 2 throtle boddies were soaked with fuel tried starting it fired up and ran and IDLE'd by it self for a good minute :S, really weird, wha im guessing is the float needles were siezed i had to use a pin to get them out, most likely the rubber piece on the end of it got damaged and thats wha most likely the problem is

you mean the little oring?

the float needle just floats there on a little pin, if i can remember correctly.

[jspecef9]

you mean the little oring?

the float needle just floats there on a little pin, if i can remember correctly.

not the oring, the actual float needle has a little pointy rubber end

[djltoronto]

not the oring, the actual float needle has a little pointy rubber end

seems like you need some new needles...
You're not supposed to poke at them with pins you know..
But you now know for next time.

[jspecef9]

seems like you need some new needles...
You're not supposed to poke at them with pins you know..
But you now know for next time.

yeh i kno im not suppose to poke them but there wasnt any other way to get them out, tried soaking them over night only one came out, i had no choice