Re: FZR"400" project build
That's it-you guys have me jealous!
I am starting to look for an FZR400 frame now. If it's that easy to get an SRAD rear end on, then I can do a hollow rear axle no problem, and can tow my trailer with it.
A YZF motor in there, 90-100 hp, 15-50 gearing oughtta make it get up and go. And I have an USD front end that was taken off of a YZF600 superbike, so it might bolt right up to an FZR frame...and it's got a Marchesini Magnesium wheel on it to boot!
350 lbs would be lot of fun.
Re: FZR"400" project build
Quote:
Originally Posted by
omnivore
That's it-you guys have me jealous!
I am starting to look for an FZR400 frame now. If it's that easy to get an SRAD rear end on, then I can do a hollow rear axle no problem, and can tow my trailer with it.
A YZF motor in there, 90-100 hp, 15-50 gearing oughtta make it get up and go. And I have an USD front end that was taken off of a YZF600 superbike, so it might bolt right up to an FZR frame...and it's got a Marchesini Magnesium wheel on it to boot!
350 lbs would be lot of fun.
If you don't mind the drive I would say this is a steal of a deal.
http://fzronline.com/forum/viewtopic.php?f=20&t=5971
Re: FZR"400" project build
Quote:
Originally Posted by
omnivore
That's it-you guys have me jealous!
I am starting to look for an FZR400 frame now. If it's that easy to get an SRAD rear end on, then I can do a hollow rear axle no problem, and can tow my trailer with it.
A YZF motor in there, 90-100 hp, 15-50 gearing oughtta make it get up and go. And I have an USD front end that was taken off of a YZF600 superbike, so it might bolt right up to an FZR frame...and it's got a Marchesini Magnesium wheel on it to boot!
350 lbs would be lot of fun.
Yes it should bolt right in. Got any pics of the front end? I love that kind of stuff.
Re: FZR"400" project build
sweet...real sweet
there are some fzr400 bikes/franken bikes/and parts on the wera forum...you might want to take a look..
Re: FZR"400" project build
This is awesome Mo. Can't wait to see the finished product.
2 Attachment(s)
Re: FZR"400" project build
Freestyle as promised this is the fzr400 project I put together several years ago that is now sold. Its using a yzf600 tank and mostly '02 r6 body work. The finished bike I filled in the holes in the mids with a silver mesh so the frame rails were hidden, and I traded the corbin to an all black seat. Also cleaned up the electrical with a black mesh wrap. can't find those pics however.
Re: FZR"400" project build
Thanks man that looks like it was done very cleanly.
Anyways today between studying for exams I was looking at the swingarm and it uses the same banana style shock linkage as the FZR so that's pretty good news. I fired off a PM to BrianP to see if if he could help me out with maintaining the geometry of the bike.
So far though I think the swingarm is going to be a very promising swap in terms of ease of completion and cost. I mean the total GSXR rear clip has only cost me $150USD shipped with practically brand new rubber on the wheel. And I even got a ss brakeline and gsxr rear master I never asked for!.
Re: FZR"400" project build
The stock damper on the gsxr stuff looks like it's going to work perfectly with the FZR.
But I am wondering should I spring for an Ohlins? I dunno how nervous this bike is going to feel just yet.
Re: FZR"400" project build
I caved and bought an 06 R6 subframe with seats....
I still might try to do the custom subframe route depending on if I feel I want the bike to lose more weight and I dont care about passengers.
Re: FZR"400" project build
Re: FZR"400" project build
Looks nice.
Edit, I would love those rotors but I'm not sure they would work with my current calipers however :(
Re: FZR"400" project build
I just got my 07 R6 subframe... and holy ****. The stock FZR subframe is 13lbs... This one is 4 lbs... And I know the 08 r6 ones are magnesium and are full 1 lb lighter... But I seriously can't believe it's only 4lbs. Let alone 3lbs for the 08+ R6.
Re: FZR"400" project build
http://i186.photobucket.com/albums/x...2/photo-83.jpg
I have almost all my parts. My GSXR front wheel is waiting at SCC parcel pickup.
Re: FZR"400" project build
So the rad is leaking I just ordered one from the states. Dude had it @$150 and I did best offer and offered him $50 on ebay. And he accepted! woohoo! Gotta install that and then get it safetied.
Also just ordered up a blind hole bearing puller so I can pull my swingarm bearings and I'll use it later on the wheels if I decide to PC.
I have one more exam on Friday and then I am a free man. I will be devoting my free time to this project.
Re: FZR"400" project build
that's too pretty of a bike to cut up.
Re: FZR"400" project build
If it looks as good up close as it does from afar, I'd leave it alone.
Re: FZR"400" project build
Quote:
Originally Posted by
frekeyguy
that's too pretty of a bike to cut up.
I am not cutting any of the bike up.
I will be cutting my parts so they fit so it could potentially go back to stock. I know better than to scar an fzr400 permanently.
And even though the retro look is growing on me I still I think I rather do my own thing with it. I am thinking of keeping the plastics and seeing how they look with the USD front and the new swinger. The subframe will be the last mod to make it onto the bike.
Re: FZR"400" project build
Since that seat looks like an R1 seat, I have a tailfairing that you could take off my hands. Name a price and its yours!
Edit: I just seen that it's an R6 subframe. You are welcome to see if the tailfaring will bolt up though.
Re: FZR"400" project build
Quote:
Originally Posted by
jibbijib
Since that seat looks like an R1 seat, I have a tailfairing that you could take off my hands. Name a price and its yours!
Edit: I just seen that it's an R6 subframe. You are welcome to see if the tailfaring will bolt up though.
Thanks man I would have loved to but I want to go with the R6 item because I am going for that somewhat anorexic r6 look lol.
Re: FZR"400" project build
Quote:
Originally Posted by
frekeyguy
that's too pretty of a bike to cut up.
shhh don't say things like that, I'm trying to buy all the pretty bodywork off him to replace the rashed race spares on my project.