Printable View
Hello:
My bike is lacking torque everytime I rev it on the road no matter which gear I am in. I was wondering if this is due to lose clutch cable? Because I noticed when I shift gear the clutch is only pulled lightly not all the way inward.
If anyone know where I can find info on clutch cable adjustment, please let me know.
Thank you!
does the engine RPM increase without moving the bike forward?
precisely, yes! its my lose clutch cable's problem, isnt it?Quote:
Originally Posted by reciprocity
Nope that would be a too tight problem, if you dont have any clutch free play at the lever...If you have free play and this is happening then your clutch is toast, you need new platesQuote:
Originally Posted by kickstartt
but how do i adjust the cable on the 636? do i have to lift up the gas tank or anything?Quote:
Originally Posted by JohnnyP636
i dont ride hard and I have only started doing wheelies for maybe a few times, so my plates should be ok, right?
You have 2 places to adjust, the basic adjustments are made right at the lever. The big round dial, turn it in (right) and your adding freeplay, turn it out (left) and your taking it away...If there isnt enough room for adjustment there, you can adjust it by the clutch cover on the opposite end of the cable...There will be 2 nuts locking it into position on the bracketQuote:
Originally Posted by kickstartt
alright thx man, i will check it out laterQuote:
Originally Posted by JohnnyP636